Committee Draft
ISO/CD 2507
Thermoplastics pipes and fittings - Vicat softening temperature: General test method and test conditions for Vinyl chloride - based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile - based (ABS, ASA) Pipes and Fittings
Reference number
ISO/CD 2507
ISO/CD 2507
Edition 3
© ISO 2024
Committee Draft
ISO/CD 2507
89067
A draft is being reviewed by the committee.
Will replace ISO 2507-1:1995
| ISO 2507-2:1995
| ISO 2507-3:1995
Abstract
The method specified is based on determining the temperature at which a standard indenter, under a force of 50 N ± 1 N, penetrates 1 mm into the surface of a test piece cut from the wall of a pipe or fitting while the temperature is raised at a constant rate. Is applicable only to thermoplastics materials for which it is possible to measure the temperature at which the rate of softening becomes rapid. Is based on ISO 306:1994 which, however, applies to materials in the form of sheets.
General information
-
Status: Under developmentStage: CD approved for registration as DIS [30.99]
-
Edition: 3
-
Technical Committee :ISO/TC 138/SC 5
- RSS updates
