Reference number
ISO 20291-1:2021
International Standard
ISO 20291-1:2021
Air cargo — Restraint slings — Part 1: Design and testing
Edition 1
2021-06
Read sample
ISO 20291-1:2021
72914
Published (Edition 1, 2021)

ISO 20291-1:2021

ISO 20291-1:2021
72914
Language
Format
CHF 129
Convert Swiss francs (CHF) to your currency

Abstract

This document specifies the design criteria and testing methods adequate to guarantee the ultimate strength and operational dependability of cargo restraint sling assemblies made of steel wire rope, with a 22,25 kN (5 000 lbf) rated ultimate load capability, as can be used by the airline industry in order to restrain on board civil transport aircraft during flight, including the following:

—    cargo loaded and tied down onto airworthiness approved air cargo pallets, themselves restrained into aircraft lower deck, main deck or upper deck cargo systems and meeting the requirements of ISO 8097 (NAS 3610) or ISO 21100, or

—    non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained ("floating") pallet into either lower deck, main deck or upper deck containerized cargo compartments of an aircraft, to be restrained onto aircraft structure attachment (tie-down) points.

Two types of wire rope restraint slings are defined:

a) type A: adjustable length restraint sling assemblies, including a tension retaining device and termination fittings attached to the wire rope end eyes;

b) type B: fixed length restraint sling extensions, to be used in conjunction with a type A cable; extensions are usually terminated at both ends by eyes, without additional fittings, and can be attached through hooks or shackles.

The cables specified in this document are intended exclusively for restraint purposes on board aircraft, and not for use as lifting slings.

General information

  •  : Published
     : 2021-06
    : International Standard published [60.60]
  •  : 1
     : 20
  • ISO/TC 20/SC 9
    55.180.30 
  • RSS updates

Got a question?

Check out our Help and Support