Reference number
ISO 21113:2018
International Standard
ISO 21113:2018
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramic thin plates at room temperature
Edition 1
2018-07
Read sample
ISO 21113:2018
69929
Published (Edition 1, 2018)
This publication was last reviewed and confirmed in 2024. Therefore this version remains current.

ISO 21113:2018

ISO 21113:2018
69929
Language
Format
CHF 129
Convert Swiss francs (CHF) to your currency

Abstract

This document describes a test method for the determination of the fracture toughness of monolithic ceramic thin plates at room temperature by the single-edge precracked plate method or the single-edge V-notch plate method.

This document is intended for use with monolithic ceramics and whisker- or particulate-reinforced ceramics which are regarded as macroscopically homogeneous. It does not include continuous-fibre-reinforced ceramics composites. This document is applicable to ceramic thin plates with a thickness of 0,2 mm to <1,0 mm.

The single-edge V-notch plate method can be applied to monolithic ceramics with a grain size larger than about 1 μm. The use of this method is inappropriate for yttria tetragonal zirconia polycrystal material (Y-TZP), which consists of homogeneous fine submicron grains. The method might also be unsuitable for some other very tough or soft ceramics in which a sharp crack does not form at the root of the V-notch.

This document is for material development, material comparison, quality assurance, characterization, reliability and design data generation.

General information

  •  : Published
     : 2018-07
    : International Standard to be revised [90.92]
  •  : 1
     : 21
  • ISO/TC 206
    81.060.30 
  • RSS updates

Life cycle

Got a question?

Check out our Help and Support