Reference number
ISO 13726:2008
ISO 13726:2008
© ISO 2025
International Standard
ISO 13726:2008
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions
Edition 2
2008-03
2008-03
ISO 13726:2008
40299
Published
(Edition 2, 2008)
This publication was last reviewed and confirmed in 2017.
Therefore this version remains current.
Expected to be replaced by ISO/DIS 13726 within the coming months.
Abstract
ISO 13726:2008 specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-3. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-3, but this does not limit their application.
ISO 13726:2008 covers the following accessories:
- AP2 – rod clevis, female thread (see Figure 1 and Table 1);
- AP4 – rod eye, plain, female thread (see Figure 2 and Table 2);
- AA4 – L – pivot pin (locking plate) (see Figure 3 and Table 3);
- AL6 – locking plate for pivot pin (see Figure 4 and Table 4);
- AA4 – S – plain pivot pin (see Figure 5 and Table 5).
General information
-
Status: PublishedPublication date: 2008-03Stage: International Standard to be revised [90.92]
-
Edition: 2Number of pages: 7
-
Technical Committee :ISO/TC 131/SC 3ICS :23.100.20
- RSS updates
Next version under development
Draft
International StandardISO/DIS 13726
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions
Reference number
ISO/DIS 13726
ISO/DIS 13726
Edition 1
© ISO 2025
Draft International Standard
ISO/DIS 13726
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions
Life cycle
-
Previously
WithdrawnISO 13726:1998
-
Now
-
Will be replaced by
Under developmentISO/DIS 13726
