ISO 8245:1999

Status : Published (Under review)

This standard was last reviewed and confirmed in 2021. Therefore this version remains current.

	Format	Language
std 1 63	PDF
std 2 63	Paper

Convert Swiss francs (CHF) to your currency

Abstract

This International Standard gives guidance for the determination of total carbon (TC), total inorganic carbon (TIC) and

total organic carbon (TOC) in drinking water, ground water, surface water, sea water and waste water. It also defines

terms and specifies interferences, reagents, and sample pretreatment for water samples.

The method described in this International Standard applies to water samples containing organic carbon content

ranging from 0,3 mg/l to 1000 mg/l. The lower limit concentration is only applicable in special cases, for example

drinking water, measured by highly sensitive instruments. Higher concentrations may be determined after appropriate

dilution.

This International Standard does not deal with the instrument-dependent specifications.

Purgeable organic substances, such as benzene, toluene, cyclohexane and chloroform, can also be determined using

this method.

Cyanide, cyanate and particles of elemental carbon (soot), when present in the sample, can be determined together

with the organic carbon.

Preview this standard in our Online Browsing Platform (OBP)

This standard contributes to the following Sustainable Development Goals

Check out our FAQs

Customer care

+41 22 749 08 88

Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)