Filter :
Standard and/or project under the direct responsibility of ISO/TC 102/SC 3 Secretariat Stage ICS
Iron ores — Determination of tumbler strength
95.99
Iron ores — Determination of tumble strength
95.99
Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices
95.99
Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices
90.93
Iron ores (maximum particle size 40 mm or smaller) — Determination of bulk density
95.99
Iron ores — Determination of bulk density
95.99
Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density
90.93
Iron ores — Determination of reducibility
95.99
Iron ores — Determination of reducibility
95.99
Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index
95.99
Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index
95.99
Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index
60.60
Iron ores — Static test for low-temperature reduction-disintegration — Part 1: Reaction with CO, CO2 and H2
95.99
Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2
95.99
Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2
90.93
Iron ores — Static test for low-temperature reduction-disintegration — Part 2: Reaction with CO
95.99
Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2
95.99
Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2
90.93
Iron ores — Low-temperature disintegration test — Method using cold tumbling after static reduction
95.99
Iron ore pellets — Determination of relative free-swelling index
95.99
Iron ore pellets for blast furnace feedstocks — Determination of the free-swelling index
95.99
Iron ore pellets for blast furnace feedstocks — Determination of the free-swelling index
60.60
Iron ore pellets — Determination of crushing strength
95.99
Iron ore pellets — Determination of crushing strength
95.99
Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength
95.99
Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength
90.93
Iron ores — Determination of bulk density for ores of maximum particle size larger than 40 mm
95.99
Iron ores — Determination of relative reducibility
95.99
Iron ores — Determination of relative reducibility
95.99
Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index
95.99
Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index
90.93
Iron ores — Determination of reduction properties under load
95.99
Iron ores for blast furnace feedstocks — Determination of reduction under load
95.99
Iron ores for blast furnace feedstocks — Determination of reduction under load
95.99
Iron ores for blast furnace feedstocks — Determination of reduction under load
60.60
Iron ore fines — Method for presentation of the results of sintering tests
90.20
Iron ores — Determination of decrepitation index
95.99
Iron ores for blast furnace feedstocks — Determination of the decrepitation index
95.99
Iron ores for blast furnace feedstocks — Determination of the decrepitation index
90.92
Iron ores for blast furnace feedstocks — Determination of the decrepitation index
40.92
Iron ore pellets — Determination of clustering of feedstock for direct reduction by gas reforming processes
95.99
Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index
95.99
Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index
90.93
Iron ores — Determination of disintegration and metallization of feedstock for direct reduction by gas reforming processes
95.99
Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization
95.99
Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization
95.99
Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization
60.60
Iron ores — Determination of reducibility and metallization of feedstock for direct reduction by gas reforming processes
95.99
Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization
95.99
Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization
90.93
Iron ores — Dynamic test for low-temperature reduction-disintegration
95.99
Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method
95.99
Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method
90.93
Direct reduced iron — Determination of tumble strength of hot briquetted iron (HBI)
95.99
Direct reduced iron — Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
90.20
Direct reduced iron — Determination of apparent density and water absorption of hot briquetted iron (HBI)
95.99
Direct reduced iron — Determination of apparent density and water absorption of hot briquetted iron (HBI)
90.93
Iron ores — Determination of specific surface area — Test method using air-permeability apparatus (Blaine)
60.60

No matching records found. Please try changing the filter settings.