Filter :
Standard and/or project under the direct responsibility of ISO/TC 45/SC 4 Secretariat Stage ICS
Withdrawal of ISO/R 1398-1970
95.99
Rubber- or plastics-coated fabrics — Accelerated-ageing tests
95.99
Rubber- or plastics-coated fabrics — Accelerated-ageing tests
95.99
Rubber- or plastics-coated fabrics — Accelerated-ageing tests
60.60
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
95.99
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
95.99
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
90.93
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
95.99
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
90.93
Rubber, vulcanized — Preferred gradations of properties
95.99
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
95.99
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break — Technical Corrigendum 1
95.99
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
90.93
Flexible cellular polymeric materials — Determination of compression set
95.99
Flexible cellular polymeric materials — Determination of compression set — Amendment 1
95.99
Flexible cellular polymeric materials — Determination of compression set
60.60
Vulcanized rubber — Guide to storage
95.99
Rubber products — Guidelines for storage
90.93
Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing
90.93
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass
95.99
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass
90.93
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
95.99
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
90.93
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness
95.99
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness
90.93
Rubber threads — Methods of test
95.99
Rubber threads — Methods of test
95.99
Rubber threads — Methods of test
90.93
Rubber- or plastics-coated fabrics — Determination of coating adhesion
95.99
Rubber- or plastics-coated fabrics — Determination of coating adhesion
90.60
Polymeric materials, cellular flexible — Determination of hardness (indentation technique)
95.99
Flexible cellular polymeric materials — Determination of hardness (indentation technique)
95.99
Flexible cellular polymeric materials — Determination of hardness (indentation technique) — Technical Corrigendum 1
95.99
Flexible cellular polymeric materials — Determination of hardness (indentation technique)
90.93
Flexible and rigid cellular polymeric materials — Accelerated ageing tests
95.99
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 1
95.99
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 2
95.99
Flexible and rigid cellular polymeric materials — Accelerated ageing tests
60.60
Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions
95.99
Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions
60.60
Rubber — Tolerances for products — Part 1: Dimensional tolerances
95.99
Rubber — Tolerances for products — Part 1: Dimensional tolerances — Amendment 1: Classification system for flash
95.99
Rubber — Tolerances for products — Part 1: Dimensional tolerances
90.93
Rubber — Tolerances for products — Part 2: Geometrical tolerances
95.99
Rubber — Tolerances for products — Part 2: Geometrical tolerances
95.99
Rubber — Tolerances for products — Part 2: Geometrical tolerances
60.60
Rubber — Dimensional tolerances for use with products
95.99
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method
95.99
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method
60.60
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
95.99
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
60.60
Rubber- or plastics-coated fabrics — Determination of bursting strength
95.99
Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding
95.99
Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding
90.93
Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials
90.93
Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials — Amendment 1
60.60
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials
90.93
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials — Amendment 1
60.60
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
90.93
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1
60.60
Rubber building gaskets — Materials in preformed solid vulcanizates used for sealing glazing and panels — Specification
95.99
Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods
95.99
Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods
60.60
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
90.92
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
40.20
Rubber, vulcanized — Preformed compression seals for use between concrete motorway paving sections — Specification for material
95.99
Rubber, vulcanized — Preformed joint seals for use between concrete paving sections of highways — Specification
90.93
Rubber-coated fabrics — Determination of rubber-to-fabric adhesion — Direct tension method
90.93
Polymeric materials, cellular flexible — Determination of air flow permeability
90.93
Rubber- or plastics-coated fabrics — Low-temperature impact test
95.99
Rubber- or plastics-coated fabrics — Low-temperature impact test
60.60
Cellular rubbers and plastics — Determination of dynamic cushioning performance
90.93
Cellular rubbers and plastics — Determination of dynamic cushioning performance — Amendment 1
60.60
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods
95.99
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods
90.93
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method
95.99
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method
60.60
Fabrics coated with rubber or plastics — Determination of tear resistance
95.99
Rubber- or plastics-coated fabrics — Low-temperature bend test
95.99
Rubber- or plastics-coated fabrics — Low-temperature bend test
90.60
Rubber latex coated fabric gloves — Specification
40.00
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader
95.99
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader
90.93
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader
95.99
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader
60.60
Rubber- or plastics-coated fabrics — Determination of crush resistance
90.93
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification
95.99
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification
90.92
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification
30.60
Rubber- or plastics-coated fabrics — Determination of blocking resistance
90.92
Rubber- or plastics-coated fabrics — Determination of blocking resistance
40.99
Rubber or plastics coated fabrics — Determination of flexibility — Flat loop method
90.93
Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing and rubbing
95.99
Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing and rubbing
90.93
Polymeric materials, cellular flexible — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
95.99
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
95.99
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
90.93
Rubber — Compatibility between hydraulic fluids and standard elastomeric materials
90.93
Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness
95.99
Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness
90.93
Rubber- or plastics-covered rollers — Specifications — Part 2: Surface characteristics
95.99
Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics
90.93
Rubber- or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
90.93
Rubber products — Bridge bearings — Specification for rubber materials
90.93
Rubber seals — Joint rings used for gas supply pipes and fittings — Specification for material
95.99
Rubber seals — Joint rings used for petroleum product supply pipes and fittings — Specification for material
95.99
Rubber- or plastics-coated fabrics — Determination of resistance to liquids
95.99
Rubber- or plastics-coated fabrics — Determination of resistance to liquids
60.60
Plastics coated fabrics — Polyvinyl chloride coatings — Rapid method for checking fusion
90.93
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
95.99
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
95.99
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
60.60
Polymeric materials, cellular flexible — Polyvinylchloride foam sheeting — Specification
90.93
Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification
95.99
Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification
60.60
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting
90.93
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Amendment 1
60.60
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Technical Corrigendum 1: Sheeting
60.60
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions
90.92
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions
30.99
Rubber- or plastics-coated fabrics — Measurement of gas permeability
95.99
Rubber- or plastics-coated fabrics — Measurement of gas permeability
95.99
Rubber- or plastics-coated fabrics — Measurement of gas permeability
60.60
Polymeric materials, cellular flexible — Method of assessment of air flow value at constant pressure-drop
95.99
Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop
90.92
Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop
40.99
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics
95.99
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics
90.92
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics
30.99
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics
95.99
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics
90.93
Plastics-coated fabrics for upholstery — Part 3: Specification for polyurethane-coated woven fabrics
90.93
Rubber materials — Chemical resistance
95.99
Rubber materials — Chemical resistance
90.93
Rubber or plastics covered rollers — Enquiries and orders — Recommendations for technical information to be supplied by purchaser
90.93
Rubber- or plastics-coated fabrics — Determination of resistance to damage by flexing
90.93
Flexible cellular polymeric materials — Determination of tear strength
95.99
Flexible cellular polymeric materials — Determination of tear strength
95.99
Flexible cellular polymeric materials — Determination of tear strength
60.60
PVC-coated fabrics for tarpaulins — Specification
90.93
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics
95.99
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics — Technical Corrigendum 1
95.99
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 2: Polyurethane- and silicone elastomer-coated fabrics
95.99
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 3: Natural rubber- and synthetic rubber-coated fabrics
95.99
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification
90.93
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Technical Corrigendum 1
60.60
Flexible cellular polymeric materials — Determination of resilience
95.99
Flexible cellular polymeric materials — Determination of resilience by ball rebound
95.99
Flexible cellular polymeric materials — Determination of resilience by ball rebound
60.60
Rubber- or plastics-covered rollers — Glossary
90.93
Rubber seals — Joint rings for hot water supply pipelines up to 110 degrees C — Specification for the material
95.99
Rubber seals — Joint rings for pipelines for hot-water supply up to 110 degrees C — Specification for the material
95.99
Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material
60.60
Rubber — Recommendations for the workmanship of pipe joint rings — Description and classification of imperfections
90.93
Flexible cellular polymeric materials — Determination of creep in compression
90.93
Single-use sterile surgical rubber gloves — Specification
95.99
Single-use sterile rubber surgical gloves — Specification
95.99
Single-use sterile rubber surgical gloves — Specification — Technical Corrigendum 1
95.99
Single-use sterile rubber surgical gloves — Specification
90.92
Single-use sterile rubber surgical gloves — Specification
50.20
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
95.99
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Amendment 1
95.99
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Technical Corrigendum 1
95.99
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
95.99
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Amendment 1
95.99
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
90.92
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
10.99
Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride)
90.92
Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride)
10.99
Single-use rubber examination gloves — Specification
95.99
Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts
90.93
Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts — Amendment 1
60.60
Flexible cellular polymeric materials — Determination of compression set under humid conditions
90.93
Rubber and plastics gloves for food services — Limits for extractable substances
90.93
Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
95.99
Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
60.60
Rubber, vulcanized — Guidelines for material specification
60.60
Rubber- or plastics-coated fabrics — Determination of water absorption resistance
20.00
Meteorological balloons — Specification
90.92
Meteorological balloons — Specification
30.99
Rubber household gloves — General requirements and test methods
90.60
General purpose rubber thread — Specification
90.93
Natural rubber latex cleanroom gloves — Specification
90.60
Medical gloves — Determination of removable surface powder
90.93
Rubber- or plastic-coated fabrics — Physical and mechanical test — Determination of bending force
60.60
Elastomeric seismic-protection isolators — Part 1: Test methods
95.99
Elastomeric seismic-protection isolators — Part 1: Test methods — Technical Corrigendum 1
95.99
Elastomeric seismic-protection isolators — Part 1: Test methods
95.99
Elastomeric seismic-protection isolators — Part 1: Test methods
60.60
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
95.99
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications — Technical Corrigendum 1
95.99
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
95.99
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
60.60
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
95.99
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications — Technical Corrigendum 1
95.99
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
95.99
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
60.60
Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3
95.99
Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3
90.60
Elastomeric seismic-protection isolators — Part 5: Sliding seismic-protection isolators for buildings
60.60
Elastomeric seismic-protection isolators — Part 6: High-durability and high-performance specifications and test methods
60.60
Practical guidance on the use of ISO 22762 for design and testing of seismic isolation systems — Part 7: Title missing
30.99
Rubber bands — General requirements and test methods
60.60
Rubber sheets for livestock — Dairy cattle — Specification
60.60
Nitrile cleanroom gloves — Specification
60.60
Flexible cellular polymeric materials — Determination of antibacterial effectiveness
60.60
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
95.99
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
60.60
Flexible cellular polymeric materials — Determination of fatigue by a constant-strain procedure
90.93
Single-use rubber gloves for general applications — Specification
95.99
Single-use rubber gloves for general applications — Specification
60.60
Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex resistance by the flexometer method
95.99
Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex resistance by the flexometer method
60.60

No matching records found. Please try changing the filter settings.