ISO 20975-1:2023

недоступно на русском языке

Опубликовано (Версия 1, 2023)

ISO 20975-1:2023

CHF 129

Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document specifies methods for determining the through-thickness properties (i.e. strength, modulus of elasticity, Poisson’s ratio and strain-to-failure) of fibre-reinforced plastic composites using either rectangular prism and/or waisted block specimens. The methods are suitable for use with a variety of aligned and non-aligned, continuous, and discontinuous fibre formats, with both thermoset and thermoplastic matrices, ranging from 20 mm to 40 mm in thickness.

Three specimen types are described in this document. These are:

— Type I - fixed rectangular cross-section along length of specimen. It is the preferred specimen for determining elastic properties.

— Type II - waisted rectangular cross-section, variable cross-section along length of specimen. It is only suitable for determining tensile strength values and is the preferred specimen for highly anisotropic and thermoplastic materials.

— Type III - waisted rectangular cross-section, fixed cross-section along the gauge-length of specimen. It is used to provide both elastic and strength property data and is the preferred specimen for generating a full stress-strain response.

Specimen types I and II are also suitable for use with unreinforced plastics but are unsuitable for use with rigid cellular materials and sandwich structures containing cellular materials.

Two testing modes are covered:

— Method A – Tension

— Method B – Compression

Общая информация

Текущий статус
: Опубликовано

Дата публикации
: 2023-01

Этап
: Опубликование международного стандарта [60.60]
Версия
: 1
Технический комитет :
ISO/TC 61/SC 13

ICS :
83.120
RSS обновления