International Standard
ISO 15016:2015
Ships and marine technology — Guidelines for the assessment of speed and power performance by analysis of speed trial data
Reference number
ISO 15016:2015
Версия 2
2015-04
© ISO 2024
International Standard
Предпросмотр
недоступно на русском языке
Опубликовано (Версия 2, 2015)

ISO 15016:2015

Формат
Язык
CHF 216
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

The primary purpose of speed and power trials is to determine a ship's performance in terms of ship's speed, power and propeller shaft speed under prescribed ship's conditions and thereby verify the satisfactory attainment of a ship's speed stipulated by EEDI regulations and/or contract.

ISO 15016:2015 defines and specifies the following procedures to be applied in the preparation, execution, analysis and reporting of speed trials for ships, with reference to the effects which may have an influence upon the speed, power and propeller shaft speed relationship:

· the responsibility of each party involved,

· the trial preparations,

· the ship's condition,

· the limiting weather and sea conditions,

· the trial procedure,

· the execution of the trial,

· the measurements required,

· the data acquisition and recording,

· the procedures for the evaluation and correction,

· the processing of the results.

The contracted ship's speed and the ship's speed for EEDI are determined for stipulated conditions and at specific draughts (contract draught and/or EEDI draught). For EEDI, the environmental conditions are: no wind, no waves, no current and deep water of 15°C.

Normally, such stipulated conditions are unlikely to be experienced in part or in full during the actual trials. In practice, certain corrections for the environmental conditions such as water depth, surface wind, waves, current and deviating ship draught, have to be considered. For this purpose, during the speed and power trials, not only are shaft power and ship's speed measured, but also relevant ship data and environmental conditions.

The applicability of ISO 15016:2015 is limited to ships of the displacement type.

Общая информация

  • Текущий статус
     : Опубликовано
    Дата публикации
     : 2015-04
    Этап
    : Между-народный стандарт подлежит пересмотру [90.92]
  • Версия
     : 2
  • Технический комитет :
    ISO/TC 8/SC 6
    ICS :
    47.020.01 
  • RSS обновления

Новая версия в процессе разработки

Draft International Standard
ISO/DIS 15016.2
Ships and marine technology — Specifications for the assessment of speed and power performance by analysis of speed trial data
Reference number
ISO/DIS 15016.2
Версия 1
© ISO 2024
Draft
International Standard
Предпросмотр

ISO/DIS 15016.2

Ships and marine technology — Specifications for the assessment of speed and power performance by analysis of speed trial data

ISO/DIS 15016.2

Формат
Язык
CHF 129
Пересчитать швейцарские франки (CHF) в ваша валюта

Жизненный цикл

Цели в области устойчивого развития

Данный стандарт разработан для достижения следующих Цель устойчивого развития

9
Индустриализация, инновации и инфраструктура

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)

  2. Интернет-магазин
  3. Каталог стандартов
  4. ТК
  5. ISO/TC 8/SC 6
  6. ISO 15016:2015