Тезис
PreviewThis International Standard defines the signalling procedures and protocol for the purpose of circuit-switched Call Control at
the Q-reference point between Private Integrated Network Exchanges (PINXs) connected together within a Private Integrated
Services Network (PISN).
The Q reference point is defined in ISO/IEC 11579-1.
This International Standard is based upon that described in ITU-T Recommendation Q.931, including the provisions for
symmetrical operation described in annex D of that recommendation.
Service specifications are produced in three stages and according to the method specified in ETS 300 387. This International
Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and
stage 2 specifications in ECMA-142, ECMA-148 and ISO/IEC 11584.
This International Standard is applicable to PINXs which interconnect to form a PISN.
Annex ZC is an integral part of this International Standard.
-
Текущий статус: ОпубликованоДата публикации: 2000-03
-
Версия: 3
-
Технический комитет: ISO/IEC JTC 1/SC 6 Telecommunications and information exchange between systems
-
- ICS :
- 33.040.35 Telephone networks
Приобрести данный стандарт
Формат | Язык | |
---|---|---|
std 1 208 | Бумажный |
- CHF208
Жизненный цикл
-
Ранее
ОтозваноISO/IEC 11572:1997
ОтозваноISO/IEC 11572:1997/Amd 1:1997
-
Сейчас
ОпубликованоISO/IEC 11572:2000
Стандарт, который пересматривается каждые 5 лет
Этап: 90.60 (Hа стадии пересмотра)-
00
Предварительная стадия
-
10
Стадия, связанная с внесением предложения
-
20
Подготовительная стадия
-
30
Стадия, связанная с подготовкой проекта комитета
-
40
Стадия, связанная с рассмотрением проекта международного стандарта
-
50
Стадия, на которой осуществляется принятие стандарта
-
60
Стадия, на которой осуществляется публикация
-
90
Стадия пересмотра
-
95
Стадия, на которой осуществляется отмена стандарта
-
00
Появились вопросы?
Ознакомьтесь с FAQ
Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)