Reference number
ISO/IEC 14776-341:2000
International Standard
ISO/IEC 14776-341:2000
Information technology — Small Computer System Interface-3 (SCSI-3) — Part 341: Controller Commands (SCC)
Edition 1
2000-06
Preview
ISO/IEC 14776-341:2000
25514
недоступно на русском языке
Опубликовано (Версия 1, 2000)
Последний раз этот публикация был пересмотрен в  2018. Поэтому данная версия остается актуальной.

ISO/IEC 14776-341:2000

ISO/IEC 14776-341:2000
25514
Язык
Формат
CHF 216
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This International Standard defines the command set extensions for SCSI-3 storage array devices; commonly known as RAID devices. This standard is principally intended to be used in conjunction with, not as an alternate to, any of the SCSI-3 command standards and the SCSI-3 Architecture Model Standard (ISO/IEC IS 14776-411). The resulting commands facilitate the control and configuration of SCSI-3 storage arrays and thus provide a common command specification for both system integrators and suppliers of SCSI-3 storage array devices. The clause(s) of this standard pertaining to the SCSI-3 storage array device class, implemented in conjunction with the applicable clauses within any of the SCSI-3 command standards, shall specify the standard command set available for SCSI-3 storage arrays. The objectives of the SCSI-3 Controller Commands is to provide the following: a) Transfer commands unique to SCSI-3 Controller Command devices; b) Control commands to manage the operation of an SCSI-3 Controller Command device; c) Optional device mapping and pass-through support.

Общая информация

  •  : Опубликовано
     : 2000-06
    : Подтверждение действия международного стандарта [90.93]
  •  : 1
  • ISO/IEC JTC 1/SC 25
    35.200 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ