Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 2/SC 11 Секретариата | Этап | ICS |
---|---|---|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
|
95.99 | |
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
|
90.92 | |
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread — Technical Corrigendum 1
|
60.60 | |
Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
|
20.00 |
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners not under tensile stresses
|
95.99 | |
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
|
90.93 | |
Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
|
90.93 | |
Fasteners — Mechanical properties of fasteners made of carbon steel and alloy steel — Part 11: Bolts, screws and studs with diameters above 39 mm and up to 100 mm and specified property classes
|
20.00 |
|
Slotted cheese head screws — Product grade A
|
95.99 | |
Slotted cheese head screws — Product grade A
|
90.93 | |
Slotted pan head screws — Product grade A
|
95.99 | |
Slotted pan head screws — Product grade A
|
90.93 | |
Slotted countersunk flat head screws (common head style) — Product grade A
|
95.99 | |
Slotted countersunk flat head screws — Product grade A
|
90.93 | |
Countersunk slotted raised head screws (common head style) — Product grade A
|
95.99 | |
Slotted raised countersunk head screws — Product grade A
|
90.93 | |
Slotted headless screws with shank
|
90.93 | |
Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results
|
90.93 | |
Hexagon head bolts — Product grades A and B
|
95.99 | |
Hexagon head bolts — Product grades A and B
|
95.99 | |
Fasteners — Hexagon head bolts — Product grades A and B
|
60.60 | |
Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter)
|
95.99 | |
Fasteners — Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) — Product grade B
|
60.60 | |
Hexagon head bolts — Product grade C
|
95.99 | |
Hexagon head bolts — Product grade C
|
95.99 | |
Fasteners — Hexagon head bolts — Product grade C
|
60.60 | |
Hexagon head screws — Product grades A and B
|
95.99 | |
Hexagon head screws — Product grades A and B
|
95.99 | |
Fasteners — Hexagon head screws — Product grades A and B
|
95.99 | |
Fasteners — Hexagon head screws — Product grades A and B
|
60.60 | |
Hexagon head screws — Product grade C
|
95.99 | |
Hexagon head screws — Product grade C
|
95.99 | |
Fasteners — Hexagon head screws — Product grade C
|
60.60 | |
Hexagon socket set screws with flat point
|
90.92 | |
Hexagon socket set screws with flat point
|
10.99 |
|
Hexagon socket set screws with cone point
|
90.92 | |
Hexagon socket set screws with cone point
|
10.99 |
|
Hexagon socket set screws with dog point
|
90.92 | |
Hexagon socket set screws with dog point
|
10.99 |
|
Hexagon socket set screws with cup point
|
90.92 | |
Hexagon socket set screws with cup point
|
10.99 |
|
Hexagon flange bolts — Small series
|
95.99 | |
Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B
|
90.93 | |
Hexagon socket head cap screws
|
90.93 | |
Slotted set screws with flat point
|
95.99 | |
Slotted set screws with flat point
|
95.99 | |
Fasteners — Slotted set screws with flat point
|
60.60 | |
Pan head screws with type H or type Z cross recess — Product grade A
|
95.99 | |
Pan head screws with type H or type Z cross recess — Product grade A
|
90.93 | |
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel of property class 4.8
|
95.99 | |
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8
|
90.93 | |
Cross-recessed countersunk flat head screws (common head style) — Grade A — Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals
|
95.99 | |
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
|
90.93 | |
Countersunk raised head screws (common head style) with type H or type Z cross recess — Product grade A
|
95.99 | |
Raised countersunk head screws (common head style) with type H or type Z cross recess — Product grade A
|
90.93 | |
Cross recessed cheese head screws
|
95.99 | |
Cross-recessed cheese head screws
|
90.93 | |
Hexagon socket head shoulder screws
|
90.93 | |
Button head screws — Part 1: Hexagon socket button head screws
|
95.99 | |
Fasteners — Button head screws with reduced loadability — Part 1: Hexagon socket button head screws
|
60.60 | |
Button head screws — Part 2: Hexagon socket button head screws with collar
|
95.99 | |
Fasteners — Button head screws with reduced loadability — Part 2: Hexagon socket button head screws with collar
|
60.60 | |
Fasteners — Button head screws with reduced loadability — Part 3: Hexalobular socket button head screws
|
30.60 |
|
Fasteners — Button head screws with reduced loadability — Part 4: Hexalobular socket button head screws with collar
|
30.60 |
|
Hexagon socket button head screws
|
95.99 | |
Plain washers for high-strength structural bolting, hardened and tempered
|
95.99 | |
Slotted set screws with cone point
|
95.99 | |
Fasteners — Slotted set screws with cone point
|
60.60 | |
Slotted set screws with long dog point
|
95.99 | |
Fasteners — Slotted set screws with dog point
|
60.60 | |
Slotted set screws with cup point
|
95.99 | |
Fasteners — Slotted set screws with cup point
|
60.60 | |
Countersunk flat head screws — Part 2: Penetration depth of cross recesses
|
90.93 | |
Countersunk head screws — Head configuration and gauging
|
90.93 | |
Hexagon head screws with metric fine pitch thread — Product grades A and B
|
95.99 | |
Hexagon head screws with metric fine pitch thread — Product grades A and B
|
95.99 | |
Fasteners — Hexagon head screws, with fine pitch thread — Product grades A and B
|
60.60 | |
Cup head square neck bolts with small head and short neck — Product grade B
|
90.93 | |
Hexagon head bolts with metric fine pitch thread — Product grades A and B
|
95.99 | |
Hexagon head bolts with metric fine pitch thread — Product grades A and B
|
95.99 | |
Fasteners — Hexagon head bolts, with fine pitch thread — Product grades A and B
|
60.60 | |
Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals
|
95.99 | |
Hexagon socket countersunk head screws
|
95.99 | |
Hexagon socket countersunk head screws — Amendment 1
|
95.99 | |
Fasteners — Hexagon socket countersunk head screws with reduced loadability
|
90.93 | |
Screw and washer assemblies with plain washers — Washer hardness classes 200 HV and 300 HV
|
95.99 | |
Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV
|
90.93 | |
Hexalobular internal driving feature for bolts and screws
|
95.99 | |
Hexalobular internal driving feature for bolts and screws
|
90.93 | |
Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A
|
95.99 | |
Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A
|
90.93 | |
Hexagon socket head cap screws with metric fine pitch thread
|
90.93 | |
Fasteners — Hexalobular socket set screws
|
30.60 |
|
Hexalobular socket head cap screws
|
95.99 | |
Hexalobular socket head cap screws
|
90.93 | |
Hexalobular socket cheese head screws
|
95.99 | |
Hexalobular socket cheese head screws — Technical Corrigendum 1
|
95.99 | |
Hexalobular socket cheese head screws
|
90.93 | |
Fasteners — Hexalobular socket countersunk flat head screws
|
95.99 | |
Fasteners — Hexalobular socket countersunk flat head screws (common head style) with reduced loadability
|
60.60 | |
Fasteners — Hexalobular socket countersunk head screws, high head
|
90.93 | |
Hexalobular socket pan head screws
|
95.99 | |
Hexalobular socket pan head screws
|
90.93 | |
Hexalobular socket raised countersunk head screws
|
95.99 | |
Hexalobular socket raised countersunk head screws
|
90.93 | |
Hexagon bolts with flange — Small series — Product grade A
|
95.99 | |
Hexagon bolts with flange — Small series — Product grade A
|
90.93 | |
Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A
|
95.99 | |
Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A — Technical Corrigendum 1
|
95.99 | |
Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A
|
90.93 | |
Fasteners — Torque/clamp force testing — Part 1: Test method for acceptance inspection
|
20.98 |
|
Fasteners — Torque/clamp force testing — Part 2: Test methods under practical or particular conditions
|
20.98 |
|
Fasteners — Torque/clamp force testing
|
90.93 | |
Fasteners — Torque/clamp force testing — Amendment 1
|
60.60 | |
Gauging of hexagon sockets
|
90.93 | |
Fasteners — Stress area of ISO metric fasteners
|
10.99 |
|
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.