Подкомитет | Заголовок подкомитета | Опубликованные стандарты | Стандарты, находящиеся на стадии разработки |
---|---|---|---|
ISO/TC 2/SC 7 | Reference standards | 21 | 4 |
ISO/TC 2/SC 11 | Fasteners with metric external thread | 54 | 11 |
ISO/TC 2/SC 12 | Fasteners with metric internal thread | 25 | 10 |
ISO/TC 2/SC 13 | Fasteners with non-metric thread | 21 | 0 |
ISO/TC 2/SC 14 | Surface coatings | 8 | 3 |
Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 2 Секретариата | Этап | ICS |
---|---|---|
Withdrawal of ISO/R 273/1-1962
|
95.99 | |
Withdrawal of ISO/R 273/2-1968
|
95.99 | |
Slotted and castle nuts with metric thread
|
95.99 | |
Slotted and castle nuts with metric thread 42 up to and including 100 mm thread diameter
|
95.99 | |
Withdrawal of ISO/R 861-1968
|
95.99 | |
Plain washers for metric bolts, screws and nuts — General plan
|
95.99 | |
Plain washers for metric bolts, screws and nuts for general purposes — General plan
|
90.93 | |
Plain washers for metric bolts, screws and nuts for general purposes — General plan — Technical Corrigendum 1
|
60.60 | |
Mechanical properties of fasteners — Part 1: Bolts, screws and studs
|
95.99 | |
Mechanical properties of fasteners — Part 1: Bolts, screws and studs
|
95.99 | |
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs
|
95.99 | |
Mechanical properties of fasteners — Part 2: Nuts with specified proof load values
|
95.99 | |
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes
|
90.93 | |
Withdrawal of ISO/R 898/3-1969
|
95.99 | |
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes — Amendment 1
|
60.60 | |
Withdrawal of ISO 898/4-1972
|
95.99 | |
Mechanical properties of fasteners — Part 5: Set screws and similar threaded fasteners not under tensile stresses
|
95.99 | |
Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread
|
95.99 | |
Rivet shank diameters
|
90.93 | |
Rivet shank diameters (diameter range 1 to 36 mm)
|
95.99 | |
Slotted cheese head screws — Product grade A
|
95.99 | |
Split pins — Metric series
|
95.99 | |
Split pins
|
90.93 | |
Tapping screws thread
|
95.99 | |
Hexagon head tapping screws — Inch series
|
95.99 | |
Slotted pan head screws — Product grade A
|
95.99 | |
Slotted countersunk flat head screws (common head style) — Product grade A
|
95.99 | |
Slotted raised countersunk head screws (common head style) — Product grade A
|
95.99 | |
Prevailing torque type steel hexagon nuts — Mechanical and performance properties
|
95.99 | |
Prevailing torque type steel hexagon nuts — Mechanical and performance properties
|
95.99 | |
Prevailing torque type steel hexagon nuts — Mechanical and performance properties — Technical Corrigendum 1
|
95.99 | |
Parallel pins, unhardened — Metric series
|
95.99 | |
Parallel pins, unhardened
|
95.99 | |
Parallel pins, of unhardened steel and austenitic stainless steel
|
90.93 | |
Taper pins, unhardened — Metric series
|
95.99 | |
Taper pins, unhardened
|
90.93 | |
Clevis pins — Metric series
|
95.99 | |
Clevis pins without head
|
90.93 | |
Clevis pins with heads — Metric series
|
95.99 | |
Clevis pins with head
|
90.93 | |
Slotted headless screws — Metric series
|
95.99 | |
Hexagon socket set screws — Metric series
|
95.99 | |
Prevailing torque-type steel hexagon locknuts — Dimensions — Metric series
|
95.99 | |
Prevailing torque-type steel hexagon locknuts — Dimensions — Inch series
|
95.99 | |
Heat-treated steel tapping screws — Mechanical properties
|
95.99 | |
Tapping screws according to ISO/R 1478 to 1483 — Minimum and maximum lengths
|
95.99 | |
Fasteners — Acceptance inspection
|
95.99 | |
Fasteners — Acceptance inspection
|
95.99 | |
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs
|
95.99 | |
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs
|
95.99 | |
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs with specified grades and property classes
|
60.60 | |
Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2: Nuts
|
95.99 | |
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts
|
95.99 | |
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts with specified grades and property classes
|
60.60 | |
Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
|
95.99 | |
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
|
90.92 | |
Fasteners — Mechanical properties of corrosion resistant stainless steel fasteners — Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes
|
50.20 | |
Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 4: Tapping screws
|
95.99 | |
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws
|
90.92 | |
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws with specified grades and hardness classes
|
50.20 | |
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications
|
60.60 | |
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners
|
60.60 | |
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 7: Flat washers with specified grades and property classes
|
60.60 | |
Corrosion-resistant stainless steel fasteners — Specifications
|
95.99 | |
Threaded fasteners — Axial load fatigue testing — Part 1: Test methods
|
95.99 | |
Hexagon head bolts — Product grades A and B
|
95.99 | |
Hexagon head bolts — Product grades A and B
|
95.99 | |
Hexagon head bolts — Product grade C
|
95.99 | |
Hexagon head bolts — Product grade C
|
95.99 | |
Hexagon head screws — Product grades A and B
|
95.99 | |
Hexagon head screws — Product grades A and B
|
95.99 | |
Hexagon head screws — Product grade C
|
95.99 | |
Hexagon head screws — Product grade C
|
95.99 | |
Hexagon socket set screws with flat point
|
95.99 | |
Hexagon socket set screws with flat point
|
95.99 | |
Hexagon socket set screws with cone point
|
95.99 | |
Hexagon socket set screws with cone point
|
95.99 | |
Hexagon socket set screws with dog point
|
95.99 | |
Hexagon socket set screws with dog point
|
95.99 | |
Hexagon socket set screws with cup point
|
95.99 | |
Hexagon socket set screws with cup point
|
95.99 | |
Hexagon nuts, style 1 — Product grades A and B
|
95.99 | |
Hexagon nuts, style 1 — Product grades A and B
|
95.99 | |
Hexagon nuts, style 2 — Product grades A and B
|
95.99 | |
Hexagon nuts — Product grade C
|
95.99 | |
Hexagon nuts — Product grade C
|
95.99 | |
Hexagon thin nuts — Product grades A and B (chamfered)
|
95.99 | |
Hexagon thin nuts (chamfered) — Product grades A and B
|
95.99 | |
Hexagon thin nuts — Product grade B (unchamfered)
|
95.99 | |
Threaded components — Electroplated coatings
|
95.99 | |
Hexagon nuts with flange — Product grade A
|
95.99 | |
Hexagon nuts for fine mechanics — Product grade F
|
95.99 | |
Tolerances for fasteners — Part 3: Plain washers for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm — Product grades A and C
|
95.99 | |
Tolerances for fasteners — Part 3: Plain washers for bolts, screws and nuts — Product grades A and C
|
95.99 | |
Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F
|
90.93 | |
Hexagon socket head cap screws — Product grade A
|
95.99 | |
Hexagon socket head cap screws — Product grade A — Amendment 1
|
95.99 | |
Hexagon socket head cap screws — Product grade A
|
95.99 | |
Hexagon socket head cap screws
|
95.99 | |
Hexagon nuts for high-strength structural bolting with large width across flats — Product grade B — Property classes 8 and 10
|
95.99 | |
Fasteners — Surface discontinuities — Part 4: Washers
|
20.00 |
|
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 — Property classes 5, 8 and 10
|
95.99 | |
Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12
|
95.99 | |
Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12
|
95.99 | |
Prevailing torque type all-metal hexagon nuts, style 2 — Property classes 5, 8, 10 and 12
|
95.99 | |
Prevailing torque type hexagon nuts with flange (with non-metallic insert)
|
95.99 | |
Prevailing torque type all-metal hexagon nuts with flange
|
95.99 | |
Cross-recessed pan head screws — Product grade A
|
95.99 | |
Cross recessed countersunk flat head screws (common head style) — Product grade A and property class 4.8 only
|
95.99 | |
Cross-recessed raised countersunk head screws (common head style) — Product grade A
|
95.99 | |
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
|
95.99 | |
Plain washers — Normal series — Product grade A
|
95.99 | |
Plain washers — Normal series — Product grade A
|
90.93 | |
Plain washers, chamfered — Normal series — Product grade A
|
95.99 | |
Plain washers, chamfered — Normal series — Product grade A
|
90.93 | |
Plain washers — Normal series — Product grade C
|
95.99 | |
Plain washers — Normal series — Product grade C
|
90.93 | |
Plain washers — Small series — Product grade A
|
95.99 | |
Plain washers — Small series — Product grade A
|
90.93 | |
Plain washers — Large series — Part 1: Product grade A
|
90.93 | |
Plain washers — Large series — Part 2: Product grade C
|
90.93 | |
Plain washers — Large series — Product grades A and C
|
95.99 | |
Plain washers — Extra large series — Product grade C
|
95.99 | |
Plain washers — Extra large series — Product grade C
|
90.93 | |
Plain washers — Extra large series — Product grade C — Technical Corrigendum 1
|
60.60 | |
Hexagon socket button head screws — Metric series
|
95.99 | |
Hexagon socket button head screws
|
95.99 | |
Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) — Product grade C — Property classes 8.8 and 10.9
|
95.99 | |
Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) — Product grade C — Property classes 8.8 and 10.9
|
95.99 | |
Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) — Product grades A and B — Property classes 5, 6 and 8
|
95.99 | |
Hexagon nuts for structural bolting with large width across flats, style 1 — Product grade B — Property class 10
|
95.99 | |
Plain washers, chamfered, hardened and tempered for high-strength structural bolting
|
95.99 | |
Hexagon nuts for structural bolting — Style 2, hot-dip galvanized (oversize tapped) — Product grade A — Property class 9
|
95.99 | |
Prevailing torque type all-metal hexagon nuts, style 1 — Property classes 5, 8 and 10
|
95.99 | |
Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9
|
95.99 | |
Hexagon nuts, style 1, with metric fine pitch thread — Product grades A and B
|
95.99 | |
Hexagon nuts, style 2, with metric fine pitch thread — Product grades A and B
|
95.99 | |
Hexagon thin nuts with metric fine pitch thread — Product grades A and B
|
95.99 | |
Hexagon head screws with metric fine pitch thread — Product grades A and B
|
95.99 | |
Cup head square neck bolts with large head — Product grade C
|
95.99 | |
Parallel pins with internal thread, unhardened
|
95.99 | |
Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
|
90.93 | |
Parallel pins, hardened (Dowel pins)
|
95.99 | |
Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)
|
90.93 | |
Parallel pins with internal thread, hardened
|
95.99 | |
Parallel pins with internal thread, of hardened steel and martensitic stainless steel
|
90.93 | |
Taper pins with internal thread, unhardened
|
90.93 | |
Taper pins with external thread, unhardened
|
90.93 | |
Plain washers for clevis pins — Product grade A
|
90.93 | |
Grooved pins — Full-length parallel grooved, with pilot
|
95.99 | |
Grooved pins — Full-length parallel grooved, with pilot
|
90.93 | |
Fasteners — Parallel grooved pins, with pilot point — Full-length diamond grooves
|
40.98 | |
Grooved pins — Full length parallel grooved, with chamfer
|
95.99 | |
Grooved pins — Full-length parallel grooved, with chamfer
|
90.92 | |
Fasteners — Parallel grooved pins, with chamfer point — Full-length diamond grooves
|
50.00 | |
Grooved pins — Half-length reverse taper grooved
|
95.99 | |
Grooved pins — Half-length reverse-taper grooved
|
90.92 | |
Fasteners — Reverse-taper grooved pins — Half-length progressive grooves
|
50.00 | |
Grooved pins — Third-length centre grooved
|
95.99 | |
Grooved pins — One-third-length centre grooved
|
90.92 | |
Grooved pins — One-third-length centre grooved
|
10.99 |
|
Fasteners — Grooved pins — One-third-length center grooves
|
40.98 | |
Grooved pins — Half-length centre grooved
|
95.99 | |
Grooved pins — Half-length centre grooved
|
90.92 | |
Grooved pins — Half-length centre grooved
|
10.99 |
|
Fasteners — Grooved pins — Half-length center grooves
|
40.98 | |
Grooved pins — Full-length taper grooved
|
95.99 | |
Grooved pins — Full-length taper grooved
|
90.92 | |
Fasteners — Taper grooved pins — Full-length progressive grooves
|
50.00 | |
Grooved pins — Half-length taper grooved
|
95.99 | |
Grooved pins — Half-length taper grooved
|
90.92 | |
Fasteners — Taper grooved pins — Half-length progressive grooves
|
50.00 | |
Grooved pins with round head
|
95.99 | |
Grooved pins with round head
|
90.92 | |
Fasteners — Grooved pins with round head — Full-length diamond grooves
|
50.00 | |
Grooved pins with countersunk head
|
95.99 | |
Grooved pins with countersunk head
|
90.92 | |
Fasteners — Grooved pins with countersunk head — Full-length diamond grooves
|
50.00 | |
Spring-type straight pins — Coiled, heavy duty
|
95.99 | |
Spring-type straight pins — Coiled, heavy duty
|
95.99 | |
Spring-type straight pins — Coiled, heavy duty
|
90.93 | |
Pins and grooved pins — Shear test
|
90.93 | |
Spring-type straight pins — Coiled, standard duty
|
95.99 | |
Spring-type straight pins — Coiled, standard duty
|
95.99 | |
Spring-type straight pins — Coiled, standard duty
|
90.93 | |
Spring-type straight pins — Coiled, light duty
|
95.99 | |
Spring-type straight pins — Coiled, light duty
|
95.99 | |
Spring-type straight pins — Coiled, light duty
|
90.93 | |
Spring-type straight pins, slotted
|
95.99 | |
Spring-type straight pins — Slotted, heavy duty
|
95.99 | |
Spring-type straight pins — Slotted, heavy duty
|
90.93 | |
Hexagon head bolts with metric fine pitch thread — Product grades A and B
|
95.99 | |
Hexagon socket countersunk head screws
|
95.99 | |
Hexalobular internal driving feature for bolts and screws
|
95.99 | |
Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A
|
90.93 | |
Spring-type straight pins — Slotted, light duty
|
95.99 | |
Spring-type straight pins — Slotted, light duty
|
90.93 | |
Fasteners — Grooved pins — General requirements
|
40.99 | |
Fasteners — Reverse-taper grooved pins — One quarter-length progressive grooves on both sides
|
40.99 | |
Fasteners — Parallel grooved pins — Half-length diamond grooves
|
50.00 | |
Hexalobular socket pan head screws — Technical Corrigendum 1
|
95.99 | |
Blind rivets — Terminology and definitions
|
90.93 | |
Blind rivets — Mechanical testing
|
90.93 | |
Hexagon bolts with flange — Small series — Product grade A — Technical Corrigendum 1
|
95.99 | |
Closed end blind rivets with break pull mandrel and protruding head — AlA/St
|
90.93 | |
Closed end blind rivets with break pull mandrel and countersunk head — AlA/St
|
90.93 | |
Closed end blind rivets with break pull mandrel and protruding head — AI/AIA
|
90.93 | |
Closed end blind rivets with break pull mandrel and protruding head — St/St
|
90.93 | |
Open end blind rivets with break pull mandrel and protruding head — AIA/St
|
90.93 | |
Open end blind rivets with break pull mandrel and countersunk head — AIA/St
|
90.93 | |
Open end blind rivets with break pull mandrel and protruding head — St/St
|
90.93 | |
Open end blind rivets with break pull mandrel and countersunk head — St/St
|
90.93 | |
Open end blind rivets with break pull mandrel and protruding head — AIA/AIA
|
90.93 | |
Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA
|
90.93 | |
Open end blind rivets with break pull mandrel and protruding head — A2/A2
|
90.93 | |
Open end blind rivets with break pull mandrel and countersunk head — A2/A2
|
90.93 | |
Passivation of corrosion-resistant stainless-steel fasteners
|
90.93 | |
Open end blind rivets with break pull mandrel and protruding head — Cu/St or Cu/Br or Cu/SSt
|
90.93 | |
Open end blind rivets with break pull mandrel and countersunk head — Cu/St or Cu/Br or Cu/SSt
|
90.93 | |
Open end blind rivets with break pull mandrel and protruding head — NiCu/St or NiCu/SSt
|
90.93 | |
Closed end blind rivets with pull mandrel and protruding head — A2/SSt
|
90.93 | |
Hexagon socket head cap screws with metric fine pitch thread
|
95.99 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.