Plastics pipes, fittings and valves for general use, смотри 23.040.20
Plastics pipes, fittings and valves for general use, смотри 23.040.45
Plastics pipes, fittings and valves for general use, смотри 23.060
Фильтр :
Стандарт и/или проект Этап ТК
Pipes and fittings of plastics materials — Socket fittings with spigot ends for domestic and industrial waste pipes — Basic dimensions : Metric series
95.99 ISO/TC 138
Buried unplasticized polyvinyl chloride (PVC) pipes for the supply of gaseous fuels — Metric series — Specification
95.99 ISO/TC 138/SC 4
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications
95.99 ISO/TC 138/SC 2
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Amendment 1
95.99 ISO/TC 138/SC 2
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for buried drainage and sewerage systems — Specifications
95.99 ISO/TC 138/SC 1
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
95.99 ISO/TC 138/SC 7
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
60.60 ISO/TC 138/SC 7
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 5: Fitness for purpose of the system
60.60 ISO/TC 138/SC 4
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specification
95.99 ISO/TC 138/SC 4
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications
95.99 ISO/TC 138/SC 4
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications
95.99 ISO/TC 138/SC 4
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
90.93 ISO/TC 138/SC 4
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
90.93 ISO/TC 138/SC 4
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
90.93 ISO/TC 138/SC 4
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 4: Code of practice for design, handling and installation
90.93 ISO/TC 138/SC 4
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specification
95.99 ISO/TC 138/SC 4
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specifications
95.99 ISO/TC 138/SC 4
Thermoplastics valves — Connection references
95.99 ISO/TC 138/SC 7
Unplasticized polyvinyl chloride (PVC-U) valves for pipes under pressure — Basic dimensions — Metric series
95.99 ISO/TC 138/SC 7
Road vehicles — Thermoplastic tubing for use in air braking systems — Part 1: Dimensions and marking
95.99 ISO/TC 22
Road vehicles — Thermoplastics tubing for air braking systems — Part 1: Dimensions and marking
95.99 ISO/TC 22
Road vehicles — Thermoplastics tubing for air braking systems — Part 2: Mounting on vehicle and test methods
95.99 ISO/TC 22
Road vehicles — Thermoplastics tubing for use in air braking systems — Part 2: Installation on the vehicle and test methods
95.99 ISO/TC 22
Road vehicles — Thermoplastics tubing for air braking systems — Part 2: Mounting on vehicle and test methods — Technical Corrigendum 1
95.99 ISO/TC 22
Road vehicles — Thermoplastics tubing for air braking systems
90.93 ISO/TC 22/SC 33
Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 2
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 2
95.99 ISO/TC 138/SC 4
Thermoplastics valves — Torque — Test method
95.99 ISO/TC 138/SC 7
Thermoplastics valves — Torque — Test method
60.60 ISO/TC 138/SC 7
Polypropylene (PP) valves for pipes under pressure — Basic dimensions — Metric series
95.99 ISO/TC 138/SC 7
Thermoplastics valves — Fatigue strength — Test method
95.99 ISO/TC 138/SC 7
Thermoplastics valves — Fatigue strength — Test method
60.60 ISO/TC 138/SC 7
High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
Polyethylene (PE) pipes for irrigation laterals — Specifications
95.99 ISO/TC 138/SC 2
Plastics pipes for the transport of water intended for human consumption — Extractability of constituents — Test method
95.99 ISO/TC 138/SC 5
Polyethylene (PE) 25 pipes for irrigation laterals — Susceptibility to environmental stress-cracking induced by insert-type fittings — Test method and specification
95.99 ISO/TC 138/SC 2
Thermoplastics valves — Pressure test methods and requirements — Part 1: General
95.99 ISO/TC 138/SC 7
Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 1: General
90.93 ISO/TC 138/SC 7
Thermoplastics valves — Pressure test methods and requirements — Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves
95.99 ISO/TC 138/SC 7
Thermoplastics valves — Pressure test methods and requirements — Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves — Technical Corrigendum 1
95.99 ISO/TC 138/SC 7
Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 2: Test conditions and basic requirements
90.93 ISO/TC 138/SC 7
Solar water heaters — Elastomeric materials for absorbers, connecting pipes and fittings — Method of assessment
90.93 ISO/TC 180
Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
95.99 ISO/TC 138/SC 4
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
95.99 ISO/TC 138/SC 4
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm
95.99 ISO/TC 138/SC 4
Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Part 4: Valves
95.99 ISO/TC 138/SC 7
Polyethylene (PE) valves for gas distribution systems
95.99 ISO/TC 138/SC 7
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
60.60 ISO/TC 45/SC 1
Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications
95.99 ISO/TC 45/SC 1
Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications
95.99 ISO/TC 45/SC 1
Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications
60.60 ISO/TC 45/SC 1
Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications
95.99 ISO/TC 45/SC 1
Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications
90.93 ISO/TC 45/SC 1
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
90.60 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture — Technical Corrigendum 1
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
90.60 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design — Technical Corrigendum 1
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
90.60 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation — Technical Corrigendum 1
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
90.60 ISO/TC 67/SC 6
Ships and marine technology — Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
90.93 ISO/TC 8/SC 3
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General — Amendment 1
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes — Amendment 1
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
90.92 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings — Amendment 1
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
90.92 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
95.99 ISO/TC 138/SC 7
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
90.92 ISO/TC 138/SC 7
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 7: Assessment of conformity
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 8: Training and assessment of fusion operators
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 1: General
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 2: Pipes
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 3: Fittings
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 6: Code of practice for design, handling and installation
95.99 ISO/TC 138/SC 4

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.