Steel strips for springs, смотри 77.140.25
Фильтр :
Стандарт и/или проект Этап ТК
Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick
95.99 ISO/TC 164/SC 1
Simple bend testing of steel sheet and strip less than 3 mm thick
95.99 ISO/TC 164/SC 2
Reverse bend testing of steel sheet and strip less than 3 mm thick
95.99 ISO/TC 164/SC 2
Modified Erichsen cupping test for steel sheet and strip
95.99 ISO/TC 164/SC 2
ISO metric series for basic thicknesses of sheet and diameters of wire
95.99 ISO/TC 62
Structural steels
95.99 ISO/TC 17/SC 3
Single cold-reduced tinplate and single cold-reduced blackplate — Part 1: Electrolytic and hot-dipped tinplate sheet and blackplate sheet
95.99 ISO/TC 17
Single cold-reduced tinplate and single cold-reduced blackplate — Part 2: Electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet form
95.99 ISO/TC 17
Hot-rolled carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Hot-rolled carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Hot-rolled carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Hot-rolled carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Hot-rolled carbon steel sheet of commercial and drawing qualities
90.93 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet of commercial and drawing qualities
90.93 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
90.92 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
40.99 ISO/TC 17/SC 12
Hot-rolled carbon steel sheet coils for the production of cold-reduced products
95.99 ISO/TC 17/SC 12
Tinplate and blackplate — Minimum packaging requirements
95.99 ISO/TC 17
High yield strength flat steel products — Part 1: General requirements
95.99 ISO/TC 17/SC 3
High yield strength flat steel products — Part 1: General requirements
95.99 ISO/TC 17/SC 3
High yield strength flat steel products — Part 1: General requirements — Amendment 1
95.99 ISO/TC 17/SC 3
High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition
95.99 ISO/TC 17/SC 3
High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition
95.99 ISO/TC 17/SC 3
High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition — Amendment 1
95.99 ISO/TC 17/SC 3
High yield strength flat steel products — Part 3: Products supplied in the heat- treated (quenched + tempered) condition
95.99 ISO/TC 17/SC 3
High yield strength flat steel products — Part 3: Products supplied in the heat-treated (quenched + tempered) condition
95.99 ISO/TC 17/SC 3
High yield strength flat steel products — Part 3: Products supplied in the heat-treated (quenched + tempered) condition — Amendment 1
95.99 ISO/TC 17/SC 3
Cold-reduced carbon steel strip with a carbon content over 0,25 %
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel strip with a carbon content over 0,25 %
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
95.99 ISO/TC 17/SC 12
Steel strip, cold-reduced with a mass fraction of carbon over 0,25 %
90.60 ISO/TC 17/SC 12
Double cold-reduced electrolytic tinplate — Part 1: Sheet
95.99 ISO/TC 17
Double cold-reduced electrolytic tinplate — Part 2: Coil for subsequent cutting into sheets
95.99 ISO/TC 17
Hot-rolled steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of structural quality
90.20 ISO/TC 17/SC 12
Hot rolled steel sheet of high yield stress structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of high yield stress structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of high yield stress structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of high yield stress structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of high yield stress structural quality
90.60 ISO/TC 17/SC 12
Cold-reduced steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Cold-reduced steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Cold-reduced steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet of structural quality
90.92 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet of structural quality
40.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
Steel sheet, zinc‐coated and zinc‐iron alloy‐coated by the continuous hot‐dip process, of structural quality
60.60 ISO/TC 17/SC 12
Continuous hot-dip terne (lead alloy) coated cold reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial drawing and structural qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip aluminium/silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Steel sheet, aluminium-silicon alloy-coated by the continuous hot-dip process, of commercial and drawing qualities
90.60 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet for vitreous enamelling
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet for vitreous enamelling
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet for vitreous enamelling
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet for vitreous enamelling
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet for vitreous enamelling
90.93 ISO/TC 17/SC 12
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
90.92 ISO/TC 17/SC 12
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
40.99 ISO/TC 17/SC 12
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
90.93 ISO/TC 17/SC 12
Hot-rolled steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet of higher yield strength with improved formability
90.93 ISO/TC 17/SC 12
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
95.99 ISO/TC 17/SC 12
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
95.99 ISO/TC 17/SC 12
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
95.99 ISO/TC 17/SC 12
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
95.99 ISO/TC 17/SC 12
Steel sheet, hot-rolled, of structural quality with improved atmospheric corrosion resistance
90.93 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet to hardness requirements
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet according to hardness requirements
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet according to hardness requirements
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel sheet according to hardness requirements
90.60 ISO/TC 17/SC 12
Hot-rolled steel strip of structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel strip of structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel strip of structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel strip of structural quality
95.99 ISO/TC 17/SC 12
Hot-rolled steel strip of structural quality
90.93 ISO/TC 17/SC 12
Hot-rolled carbon steel strip of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Hot-rolled carbon steel strip of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
Hot-rolled carbon steel strip of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
High yield strength steel plates and wide flats for cold forming — Part 1: Delivery conditions for thermomechanically-rolled steels
95.99 ISO/TC 17/SC 3
High yield strength steel plates and wide flats for cold forming — Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels
95.99 ISO/TC 17/SC 3
High yield strength flat steel products for cold forming
95.99 ISO/TC 17/SC 3
High yield strength steel plates and wide flats for cold forming — Delivery conditions
90.60 ISO/TC 17/SC 3
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
95.99 ISO/TC 17/SC 12
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
90.60 ISO/TC 17/SC 12
Hot-rolled structural steel plates — Tolerances on dimensions and shape
95.99 ISO/TC 17/SC 3
Hot-rolled structural steel plates — Tolerances on dimensions and shape
95.99 ISO/TC 17/SC 3
Hot-rolled steel plates — Tolerances on dimensions and shape
90.93 ISO/TC 17/SC 3
Steel plate with specified through-thickness characteristics
95.99 ISO/TC 17/SC 3
Through-thickness characteristics for steel products
90.20 ISO/TC 17/SC 3
Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements
95.99 ISO/TC 17/SC 3
Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements
60.60 ISO/TC 17/SC 3
Single cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets
95.99 ISO/TC 17
Double cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets
95.99 ISO/TC 17
Steel sheet, zinc-aluminium-magnesium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
60.60 ISO/TC 17/SC 12
Hot-rolled structural steel wide flats — Tolerances on dimensions and shape
90.93 ISO/TC 17/SC 3
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 1: General requirements
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
90.92 ISO/TC 17/SC 10
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and low-alloyed steels with specified room temperature and elevated temperature properties
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
90.92 ISO/TC 17/SC 10
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 3: Nickel-alloyed steels with specified low temperature properties
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
90.60 ISO/TC 17/SC 10
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
90.92 ISO/TC 17/SC 10
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 5: Austenitic steels
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled
90.60 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
90.60 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
95.99 ISO/TC 17/SC 10
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
90.92 ISO/TC 17/SC 10
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, lock-forming and structural qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
90.93 ISO/TC 17/SC 12
Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths
90.93 ISO/TC 17/SC 4
Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and sheet/plate
90.93 ISO/TC 17/SC 4
Hot-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths
90.93 ISO/TC 17/SC 4
Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and plate/sheet
90.93 ISO/TC 17/SC 4
Cold-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
Hot-rolled stainless steel narrow strip — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
Cold-rolled stainless steel narrow strip — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
Textile machinery and accessories — Strip steel for dents of reeds — Part 1: Cold rolled strip steel
95.99 ISO/TC 72/SC 3
Textile machinery and accessories — Strip steel for dents of reeds — Part 2: Hardened strip steel
95.99 ISO/TC 72/SC 3
Textile machinery and accessories — Strip steel for dents of reeds
95.99 ISO/TC 72/SC 3
Hot-rolled carbon steel sheet for machinery
95.99 ISO/TC 17/SC 12
Hot-rolled carbon steel sheet as defined by chemical composition
95.99 ISO/TC 17/SC 12
Hot-rolled carbon steel sheet as defined by chemical composition
95.99 ISO/TC 17/SC 12
Hot-rolled carbon steel sheet as defined by chemical composition
90.93 ISO/TC 17/SC 12
Hot-rolled longitudinally profiled steel plate
60.60 ISO/TC 17/SC 3
Cold-reduced electrolytic tinplate
95.99 ISO/TC 17/SC 9
Cold-reduced tinmill products — Electrolytic tinplate
90.92 ISO/TC 17/SC 9
Cold-reduced tinmill products — Electrolytic tinplate
30.60 ISO/TC 17/SC 9
Cold-reduced electrolytic chromium/chromium oxide-coated steel
95.99 ISO/TC 17/SC 9
Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel
90.92 ISO/TC 17/SC 9
Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel
30.60 ISO/TC 17/SC 9
Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel
95.99 ISO/TC 17/SC 9
Cold-reduced tinmill products — Blackplate
90.92 ISO/TC 17/SC 9
Cold-reduced tinmill products — Blackplate
30.60 ISO/TC 17/SC 9
Cold-reduced steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
Cold-reduced steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
Cold-reduced steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
Steel sheet, cold-reduced, of higher yield strength with improved formability
90.93 ISO/TC 17/SC 12
Hot-rolled steel sheet in coils of structural quality and heavy thickness
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet in coils of structural quality and heavy thickness
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet in coils of structural quality and heavy thickness
90.93 ISO/TC 17/SC 12
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
95.99 ISO/TC 17/SC 12
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
95.99 ISO/TC 17/SC 12
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
90.93 ISO/TC 17/SC 12
Continuous hot-dip zinc-5 %/aluminium alloy coated steel sheets and coils
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
95.99 ISO/TC 17/SC 12
Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
90.93 ISO/TC 17/SC 12
Hot-rolled twin-roll cast carbon steel sheet of commercial quality
95.99 ISO/TC 17/SC 12
Hot-rolled twin-roll cast steel sheet of commercial quality
60.60 ISO/TC 17/SC 12
Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
95.99 ISO/TC 17/SC 12
Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
60.60 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
95.99 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
60.60 ISO/TC 17/SC 12
Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
95.99 ISO/TC 17/SC 12
Steel sheet, twin-roll cast, zinc-coated by the continuous hot-dip process, of structural quality and high strength
60.60 ISO/TC 17/SC 12
Continuous mill flat rolled products — Guidelines for improved ordering communication
95.99 ISO/TC 17/SC 12
Continuously hot-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
Continuously hot-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
Continuously hot-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet products — Dimensional and shape tolerances
90.93 ISO/TC 17/SC 12
Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
Cold-rolled steel sheet products — Dimensional and shape tolerances
90.93 ISO/TC 17/SC 12
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
90.93 ISO/TC 17/SC 12
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
95.99 ISO/TC 17/SC 12
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
95.99 ISO/TC 17/SC 12
Steel sheet, metallic-coated by the continuous hot-dip process for corrugated steel pipe
90.93 ISO/TC 17/SC 12
Steel — Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
95.99 ISO/TC 17/SC 7
Steel — Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm
90.93 ISO/TC 17/SC 7
Hot-rolled stainless steel plates — Tolerances on dimensions and shape
95.99 ISO/TC 17/SC 4
Hot-rolled stainless steel plates — Tolerances on dimensions and shape
90.93 ISO/TC 17/SC 4
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
95.99 ISO/TC 17/SC 12
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
90.93 ISO/TC 17/SC 12

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.