Filter :
Standard and/or project | Stage | TC |
---|---|---|
Geotextiles — Sampling and preparation of test specimens
|
95.99 | ISO/TC 221 |
Geosynthetics — Sampling and preparation of test specimens
|
95.99 | ISO/TC 221 |
Geosynthetics — Sampling and preparation of test specimens
|
60.60 | ISO/TC 221 |
Geosynthetics — Determination of thickness at specified pressures — Part 1: Single layers
|
95.99 | ISO/TC 221 |
Geosynthetics — Determination of thickness at specified pressures — Part 1: Single layers
|
90.93 | ISO/TC 221 |
Geosynthetics — Determination of thickness at specified pressures — Part 1: Single layers — Amendment 1
|
60.60 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of thickness at specified pressures — Part 2: Procedure for determination of thickness of single layers of multilayer products
|
95.99 | ISO/TC 221 |
Geotextiles — Determination of thickness at specified pressures
|
95.99 | ISO/TC 221 |
Geotextiles — Determination of mass per unit area
|
95.99 | ISO/TC 221 |
Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products
|
90.93 | ISO/TC 221 |
Geosynthetics — Part 1: Terms and definitions
|
90.92 | ISO/TC 221 |
Geosynthetics — Part 1: Terms and definitions — Amendment 1
|
60.60 | ISO/TC 221 |
Geosynthetics — Part 1: Vocabulary
|
40.99 | ISO/TC 221 |
Geosynthetics — Part 2: Symbols and pictograms
|
90.92 | ISO/TC 221 |
Geosynthetics — Part 2: Symbols and pictograms — Amendment 1
|
60.60 | ISO/TC 221 |
Geotextiles — Vocabulary
|
95.99 | ISO/TC 221 |
Geosynthetics — Terms and definitions
|
95.99 | ISO/TC 221 |
Geotextiles — Wide-width tensile test
|
95.99 | ISO/TC 221 |
Geosynthetics — Wide-width tensile test
|
95.99 | ISO/TC 221 |
Geosynthetics — Wide-width tensile test
|
95.99 | ISO/TC 221 |
Geosynthetics — Wide-width tensile test
|
60.60 | ISO/TC 221 |
Geotextiles — Identification on site
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Identification on site
|
95.99 | ISO/TC 221 |
Geosynthetics — Identification on site
|
90.93 | ISO/TC 221 |
Geotextiles — Tensile test for joints/seams by wide-width method
|
95.99 | ISO/TC 221 |
Geosynthetics — Tensile test for joints/seams by wide-width strip method
|
90.93 | ISO/TC 221 |
Geotextiles and geotextile-related products — Procedure for simulating damage during installation — Part 1: Installation in granular materials
|
95.99 | ISO/TC 221 |
Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material
|
95.99 | ISO/TC 221 |
Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material (laboratory test method)
|
90.20 | ISO/TC 221 |
Clay geosynthetic barriers — Determination of water absorption of bentonite
|
90.93 | ISO/TC 221 |
Geotextiles - Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions
|
90.93 | ISO/TC 221 |
Clay geosynthetic barriers — Determination of permeability to gases
|
90.93 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, under load
|
90.93 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, without load
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, without load
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, without load
|
90.60 | ISO/TC 221 |
Geotextiles and geotextile-related products — Static puncture test (CBR test)
|
95.99 | ISO/TC 221 |
Geosynthetics — Static puncture test (CBR test)
|
90.92 | ISO/TC 221 |
Geosynthetics — Static puncture test (CBR test)
|
40.60 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of the characteristic opening size
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of the characteristic opening size
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of the characteristic opening size
|
90.60 | ISO/TC 221 |
Geosynthetics — Determination of friction characteristics — Part 1: Direct shear test
|
95.99 | ISO/TC 221 |
Geosynthetics — Determination of friction characteristics — Part 1: Direct shear test
|
90.93 | ISO/TC 221 |
Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test
|
90.92 | ISO/TC 221 |
Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test
|
60.00 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of water flow capacity in their plane — Part 1: Index test
|
60.60 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of water flow capacity in their plane — Part 2: Performance test
|
60.60 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of water flow capacity in their plane
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of water flow capacity in their plane
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Screening test methods for determining the resistance to acid and alkaline liquids
|
60.60 | ISO/TC 221 |
Geotextiles and geotextile-related products — Screening test method for determining the resistance to liquids
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 1: Geocells
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 1: Geocells
|
90.20 | ISO/TC 221 |
Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites
|
60.60 | ISO/TC 221 |
Geotextiles and geotextile-related products — Abrasion damage simulation (sliding block test)
|
95.99 | ISO/TC 221 |
Geosynthetics — Abrasion damage simulation (sliding block test)
|
90.93 | ISO/TC 221 |
Geosynthetics — Determination of the protection efficiency of a geosynthetic against impact damage
|
95.99 | ISO/TC 221 |
Geosynthetics — Determination of the protection efficiency of a geosynthetic against impact damage
|
60.60 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour
|
60.60 | ISO/TC 221 |
Geosynthetics — Dynamic perforation test (cone drop test)
|
90.92 | ISO/TC 221 |
Geosynthetics — Determination of dynamic perforation (cone drop test)
|
40.60 | ISO/TC 221 |
Geotextiles and geotextile-related products — Guidelines on durability
|
95.99 | ISO/TC 221 |
Geosynthetics — Guidelines for the assessment of durability
|
95.99 | ISO/TC 221 |
Geosynthetics — Guidelines for the assessment of durability
|
90.93 | ISO/TC 221 |
Geotextiles and geotextile-related products — Method for installing and extracting samples in soil, and testing specimens in laboratory
|
95.99 | ISO/TC 221 |
Geosynthetics — Installing and retrieving samples in the field for durability assessment
|
90.93 | ISO/TC 221 |
Geotextiles and geotextile-related products — Screening test method for determining the resistance to oxidation
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products— Screening test method for determining the resistance to oxidation at elevated oxygen pressure
|
95.99 | ISO/TC 221 |
Geosynthetics — Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation
|
90.93 | ISO/TC 221 |
Determination of long-term flow of geosynthetic drains
|
60.60 | ISO/TC 221 |
Design using geosynthetics — Part 1: General
|
60.60 | ISO/TC 221 |
Design using geosynthetics — Part 2: Separation
|
60.60 | ISO/TC 221 |
Design using geosynthetics — Part 3: Filtration
|
60.60 | ISO/TC 221 |
Design using geosynthetics — Part 4: Drainage
|
60.60 | ISO/TC 221 |
Design using geosynthetics — Part 5: Stabilization
|
60.00 | ISO/TC 221 |
Design using geosynthetics — Part 6: Protection
|
60.60 | ISO/TC 221 |
Design using geosynthetics — Part 7: Reinforcement
|
60.60 | ISO/TC 221 |
Design using geosynthetics — Part 8: Surface erosion control
|
30.99 | ISO/TC 221 |
Design using geosynthetics — Part 9: Barriers
|
60.60 | ISO/TC 221 |
Design using geosynthetics — Part 10: Asphalt pavements
|
60.60 | ISO/TC 221 |
Geosynthetics — Test method for the determination of water discharge capacity for prefabricated vertical drains
|
90.93 | ISO/TC 221 |
Geosynthetics — Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method
|
90.93 | ISO/TC 221 |
Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
|
95.99 | ISO/TC 221 |
Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
|
60.60 | ISO/TC 221 |
Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement — Technical Corrigendum 1
|
95.99 | ISO/TC 221 |
Geotextiles and geotextile-related products — Determination of index abrasion resistance characteristics under wet conditions for hydraulic applications
|
60.60 | ISO/TC 221 |
Geosynthetics — Determination of compression behaviour — Part 1: Compressive creep properties
|
95.99 | ISO/TC 221 |
Geosynthetics — Determination of compression behaviour — Part 1: Compressive creep properties
|
60.60 | ISO/TC 221 |
Geosynthetics — Determination of compression behaviour — Part 2: Determination of short-term compression behaviour
|
95.99 | ISO/TC 221 |
Geosynthetics — Determination of compression behaviour — Part 2: Determination of short-term compression behaviour
|
90.93 | ISO/TC 221 |
No matching records found. Please try changing the filter settings.