Filter :
Standard and/or project | Stage | TC |
---|---|---|
Positive-displacement vacuum pumps — Measurement of performance characteristics — Part 1: Measurement of volume rate of flow (pumping speed)
|
95.99 | ISO/TC 112 |
Positive-displacement vacuum pumps — Measurement of performance characteristics — Part 1: Measurement of volume rate of flow (pumping speed)
|
95.99 | ISO/TC 112 |
Positive displacement vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of ultimate pressure
|
95.99 | ISO/TC 112 |
Positive-displacement vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of ultimate pressure
|
95.99 | ISO/TC 112 |
Vapour vacuum pumps — Measurement of performance characteristics — Part 1: Measurement of volume rate of flow (pumping speed)
|
95.99 | ISO/TC 112 |
Vapour vacuum pumps — Measurement of performance characteristics — Part 1: Measurement of volume rate of flow (pumping speed)
|
90.93 | ISO/TC 112 |
Vapour vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of critical backing pressure
|
95.99 | ISO/TC 112 |
Vapour vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of critical backing pressure
|
90.93 | ISO/TC 112 |
Vacuum technology — Flange dimensions
|
95.99 | ISO/TC 112 |
Vacuum technology — Dimensions of non-knife edge flanges
|
60.60 | ISO/TC 112 |
Vacuum technology — Quick-release couplings — Dimensions — Part 1: Clamped type
|
95.99 | ISO/TC 112 |
Vacuum technology — Quick release couplings — Dimensions — Part 2: Screwed type
|
95.99 | ISO/TC 112 |
Vacuum technology — Dimensions of clamped-type quick-release couplings
|
95.99 | ISO/TC 112 |
Vacuum technology — Dimensions of clamped-type quick-release couplings
|
60.60 | ISO/TC 112 |
Vacuum technology — Vocabulary — Part 1: General terms
|
95.99 | ISO/TC 112 |
Vacuum technology — Vocabulary — Part 1: General terms
|
90.20 | ISO/TC 112 |
Vacuum technology — Vocabulary — Part 2: Vacuum pumps and related terms
|
95.99 | ISO/TC 112 |
Vacuum technology — Vocabulary — Part 2: Vacuum pumps and related terms
|
60.60 | ISO/TC 112 |
Vacuum technology — Vocabulary — Part 3: Vacuum gauges
|
95.99 | ISO/TC 112 |
Vacuum technology — Vocabulary — Part 3: Total and partial pressure vacuum gauges
|
90.93 | ISO/TC 112 |
Vacuum technology — Mass-spectrometer-type leak-detector calibration
|
90.93 | ISO/TC 135/SC 6 |
Vacuum gauges — Calibration by direct comparison with a reference gauge
|
90.92 | ISO/TC 112 |
Vacuum gauges — Calibration by direct comparison with a reference gauge
|
95.99 | ISO/TC 112 |
Vacuum technology — Bakable flanges — Part 2: Dimensions of knife-edge flanges
|
95.99 | ISO/TC 112 |
Vacuum technology — Bakable flanges — Dimensions
|
95.99 | ISO/TC 112 |
Vacuum technology — Bakeable flanges — Dimensions of knife-edge flanges
|
95.99 | ISO/TC 112 |
Vacuum technology — Dimensions of knife-edge flanges
|
90.92 | ISO/TC 112 |
Vacuum technology — Graphical symbols
|
95.99 | ISO/TC 112 |
Vacuum technology — Turbomolecular pumps — Measurement of performance characteristics
|
95.99 | ISO/TC 112 |
Vacuum technology — Vacuum gauges — Characteristics for a stable ionisation vacuum gauge
|
60.60 | ISO/TC 112 |
Vacuum technology — Mounting dimensions of pipeline fittings — Part 1: Non knife-edge flange type
|
95.99 | ISO/TC 112 |
Vacuum technology — Mounting dimensions of pipeline fittings — Part 1: Non knife-edge flange type
|
60.60 | ISO/TC 112 |
Vacuum technology — Mounting dimensions of pipeline fittings — Part 2: Knife-edge flange type
|
95.99 | ISO/TC 112 |
Vacuum technology — Mounting dimensions of pipeline fittings — Part 2: Knife-edge flange type
|
60.60 | ISO/TC 112 |
Vacuum technology — Pipeline fittings — Mounting dimensions
|
95.99 | ISO/TC 112 |
Vacuum gauges — Definitions and specifications for quadrupole mass spectrometers
|
90.93 | ISO/TC 112 |
Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for Pirani gauges
|
90.93 | ISO/TC 112 |
Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
|
90.93 | ISO/TC 112 |
Vacuum technology — Vacuum gauges — Characterization of quadrupole mass spectrometers for partial pressure measurement
|
90.93 | ISO/TC 112 |
Vacuum technology — Vacuum gauges — Procedures to measure and report outgassing rates
|
90.93 | ISO/TC 112 |
Vacuum technology — Right-angle valve — Dimensions and interfaces for pneumatic actuator
|
95.99 | ISO/TC 112 |
Vacuum technology — Right-angle valve — Dimensions and interfaces for pneumatic actuator
|
60.60 | ISO/TC 112 |
Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 1: General description
|
95.99 | ISO/TC 112 |
Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 1: General description
|
60.60 | ISO/TC 112 |
Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 2: Positive displacement vacuum pumps
|
95.99 | ISO/TC 112 |
Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 2: Positive displacement vacuum pumps
|
60.60 | ISO/TC 112 |
Vacuum technology — Standard methods for measuring vacuum pump performance — Part 3: Specific parameters for mechanical booster vacuum pumps
|
90.93 | ISO/TC 112 |
Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 4: Turbomolecular vacuum pumps
|
90.92 | ISO/TC 112 |
Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 5: Non-evaporable getter (NEG) vacuum pumps
|
60.60 | ISO/TC 112 |
Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 6: Cryogenic vacuum pumps
|
60.60 | ISO/TC 112 |
Vacuum technology — Standard methods for measuring vacuum-pump performance — General description
|
95.99 | ISO/TC 112 |
Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges
|
90.92 | ISO/TC 112 |
Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges
|
40.20 | ISO/TC 112 |
Vacuum technology — Turbomolecular pumps — Measurement of rapid shutdown torque
|
90.93 | ISO/TC 112 |
Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
|
90.92 | ISO/TC 112 |
Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
|
95.99 | ISO/TC 112 |
Vacuum technology — Vacuum gauges — Specifications for hot cathode ionization gauges
|
90.93 | ISO/TC 112 |
Vacuum technology — Valves — Leak test
|
90.93 | ISO/TC 112 |
No matching records found. Please try changing the filter settings.