Reference number
ISO 25862:2019
International Standard
ISO 25862:2019
Ships and marine technology — Marine magnetic compasses, binnacles and azimuth reading devices
Edition 2
2019-07
Preview
ISO 25862:2019
68015
Indisponible en français
Publiée (Edition 2, 2019)
Cette norme comprend 1 amendement.

ISO 25862:2019

ISO 25862:2019
68015
Langue
Format
CHF 173
Convertir les francs suisses (CHF) dans une autre devise

Résumé

This document specifies requirements for the construction and performance of marine magnetic compasses for navigation and steering purposes, binnacles and azimuth reading devices.

Two types of binnacle are specified; the appropriate type for a given vessel is determined by the design of the ship (see Clause 5).

This document applies to liquid-filled magnetic compasses:

— intended for use in ship's navigation and steering in sea navigation;

— having a direct reading system; and

— which can be of the reflecting, projecting or transmitting types.

In the context of this document, a magnetic compass is an instrument consisting of a directional system supported by a single pivot inside a bowl that is completely filled with liquid and supported by gimbals inside or outside the bowl. However, this document also addresses compasses without gimbals; the requirements relating to gimbals do not apply to such compasses.

This document applies to magnetic compasses carried on board:

a) all ships required to carry a standard compass as per SOLAS Chapter V, the Class A magnetic compass;

b) lifeboats and rescue boats as per the IMO Lifesaving Appliances (LSA) Code, fitted with the Class B magnetic compass; and

c) all ships to which a) and b) above do not apply, but which are fitted with a Class A or B magnetic compass.

This document does not apply to:

a) dry card compasses;

b) types of compass designed on principles different from those stated above or not complying with the descriptions given; or

c) hand bearing compasses.

The requirements for the testing and certification of marine magnetic compasses, azimuth reading devices and binnacles are given in Annexes A, B, C, and D. The requirements for the positioning in ships, the determination of safe distances and the deviation adjustment of compasses are given in Annexes E, F and G, respectively. The special requirements of the magnetic compass for lifeboats/rescue boats are given in Annex H.

Informations générales

  •  : Publiée
     : 2019-07
    : Clôture de l'examen [90.60]
  •  : 2
  • ISO/TC 8/SC 6
    47.020.70 
  • RSS mises à jour

 Amendements

Des amendements sont publiés lorsqu’il s’avère que de nouveaux éléments doivent être ajoutés à un document normatif existant. Ils peuvent également inclure des corrections d’ordre rédactionnel ou technique à appliquer au document en vigueur.

Amendement 1

Edition 2024

ISO 25862:2019/Amd 1:2024
82574
Langue
Format
CHF 18
Convertir les francs suisses (CHF) dans une autre devise

Cycle de vie

Vous avez une question?

Consulter notre Aide et assistance