Plastics — Determination of water absorption

Plastics — Determination of water absorption

Plastics — Determination of water absorption

Plastics — Determination of temperature of deflection under load — Part 1: General test method

Plastics — Determination of temperature of deflection under load — Part 1: General test method

Plastics — Determination of temperature of deflection under load — Part 1: General test method

Plastics — Determination of temperature of deflection under load — Part 1: General test method

Plastics and ebonite — Determination of temperature of deflection under load

Withdrawal of ISO/R 117-1959

Withdrawal of ISO 118-1976

Plastics — Determination of bulk factor of moulding materials

Plastics — Determination of bulk factor of moulding materials

Withdrawal of ISO/R 173-1961

Plastics — Determination of the effects of liquid chemicals, including water

Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals

Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals

Plastics — Determination of loss of plasticizers — Activated carbon method

Plastics — Determination of loss of plasticizers — Activated carbon method

Plastics — Determination of migration of plasticizers

Plastics — Determination of migration of plasticizers

Plastics — Determination of migration of plasticizers

Plastics — Determination of flexural properties of rigid plastics

Plastics — Determination of flexural properties

Plastics — Determination of flexural properties

Plastics — Determination of flexural properties — Amendment 1: Precision statement

Plastics — Determination of flexural properties

Plastics — Determination of flexural properties — Amendment 1

Plastics — Determination of flexural properties

Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test

Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test — Amendment 1

Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test

Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test

Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test

Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Amendment 1: Precision data

Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Technical Corrigendum 1

Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test

Plastics — Determination of Charpy impact strength of rigid materials

Plastics — Determination of Charpy impact strength

Plastics — Determination of Charpy impact strength — Technical Corrigendum 1

Plastics — Determination of Izod impact strength of rigid materials

Plastics — Determination of Izod impact strength

Plastics — Determination of Izod impact strength — Technical Corrigendum 1

Plastics — Determination of Izod impact strength

Plastics — Determination of Izod impact strength — Amendment 1

Plastics — Determination of Izod impact strength — Amendment 2: Precision data

Plastics — Determination of Izod impact strength

Plastics — Determination of Izod impact strength

Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod

Plastics — Qualitative evaluation of the bleeding of colorants

Plastics — List of equivalent terms

Plastics — List of equivalent terms — Addendum 1

Plastics — List of equivalent terms — Addendum 2

Plastics — List of equivalent terms — Addendum 4

Plastics — List of equivalent terms — Addendum 5

Plastics — Standard atmospheres for conditioning and testing

Plastics — Standard atmospheres for conditioning and testing

Plastics — Standard atmospheres for conditioning and testing — Technical Corrigendum 1

Plastics — Standard atmospheres for conditioning and testing

Plastics — Standard atmospheres for conditioning and testing

Withdrawal of ISO/R 292-1967

Plastics — Determination of stiffness in torsion of flexible materials — Part 1: General method

Plastics — Determination of stiffness in torsion as a function of temperature

Withdrawal of ISO/R 462-1965

Plastics — Vocabulary

Plastics — Vocabulary — Addendum 1

Plastics — Vocabulary — Addendum 2

Plastics — Vocabulary — Addendum 3

Plastics — Vocabulary

Plastics — Vocabulary — Amendment 1: Terms relating to individual macromolecules, their assemblies, dilute polymer solutions and crystalline polymers

Plastics — Vocabulary — Amendment 3: General terms and terms relating to degradable plastics

Plastics — Vocabulary — Amendment 4: Basic terms in polymer science

Plastics — Vocabulary — Amendment 5: Terms relating to carbon fibre

Plastics — Vocabulary

Plastics — Vocabulary

Plastics — Vocabulary — Amendment 1: Additional items

Plastics — Determination of the refractive index of transparent plastics

Plastics — Determination of refractive index

Plastics — Determination of refractive index

Plastics — Determination of tensile properties — Part 1: General principles

Plastics — Determination of tensile properties — Part 1: General principles — Amendment 1: Details of extensometer

Plastics — Determination of tensile properties — Part 1: General principles — Technical Corrigendum 1

Plastics — Determination of tensile properties — Part 1: General principles

Plastics — Determination of tensile properties — Part 1: General principles

Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics

Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics — Technical Corrigendum 1

Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics

Plastics — Determination of tensile properties

Plastics — Testing with the torsion pendulum

Withdrawal of ISO/R 600-1967

Plastics — Determination of compressive properties

Plastics — Determination of compressive properties

Plastics — Determination of compressive properties

Plastics — Determination of behaviour under the action of fungi and bacteria — Evaluation by visual examination or measurement of change in mass or physical properties

Plastics — Evaluation of the action of microorganisms

Plastics — Evaluation of the action of microorganisms

Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)

Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)

Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)

Withdrawal of ISO/R 869-1968

Withdrawal of ISO/R 870-1968

Plastics — Determination of temperature of evolution of flammable gases (decomposition temperature) from a small sample of pulverized material

Plastics — Determination of ignition temperature using a hot-air furnace

Plastics — Determination of ignition temperature using a hot-air furnace

Plastics — Determination of ignition temperature using a hot-air furnace

Plastics — Methods of exposure to solar radiation — Part 1: General guidance

Plastics — Methods of exposure to solar radiation — Part 1: General guidance

Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass

Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass

Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation

Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation

Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors

Withdrawal of ISO/R 878-1968

Withdrawal of ISO/R 879-1968

Plastics — Determination of creep behaviour — Part 1: Tensile creep

Plastics — Determination of creep behaviour — Part 1: Tensile creep

Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1

Plastics — Determination of creep behaviour — Part 1: Tensile creep

Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading

Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading

Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1

Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading

Withdrawal of ISO/R 922-1969

Plastics — Determination of the brittleness temperature by impact

Plastics — Determination of the brittleness temperature by impact

Plastics — Symbols — Part 1: Basic polymers and their special characteristics

Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics

Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics

Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics

Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics — Amendment 1: New symbol ST for syndiotactic

Plastics — Symbols — Part 2: Fillers and reinforcing materials

Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials

Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials

Plastics — Symbols and abbreviated terms — Part 3: Plasticizers

Plastics — Symbols and abbreviated terms — Part 3: Plasticizers

Plastics — Symbols and abbreviated terms — Part 4: Flame retardants

Plastics — Symbols and abbreviated terms — Part 4: Flame retardants — Amendment 1: Code numbers

Plastics — Symbols and abbreviated terms — Part 4: Flame retardants

Plastics — Symbols

Plastics — Determination of the melt flow rate of thermoplastics

Plastics — Determination of behaviour in a ventilated tubular oven

Plastics — Aqueous dispersions of polymers and copolymers — Freeze-thaw cycle stability test

Plastics/rubber — Polymer dispersions and synthetic rubber latices — Freeze-thaw cycle stability test

Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method

Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method

Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method

Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method

Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method

Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method

Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method

Plastics — Methods for determining the density and relative density of non-cellular plastics

Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics

Withdrawal of ISO/R 1195-1970

Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame

Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source

Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution

Plastics — Determination of flammability and burning rate of plastics in the form of film

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension

Plastics — Aqueous dispersions of polymers and copolymers — Determination of residue at 105 degrees C

Plastics — Polymer dispersions — Determination of non-volatile matter (residue) at specified temperatures

Withdrawal of ISO/R 1627-1970

Guidelines for the standardization of methods for the determination of viscosity number and limiting viscosity number of polymers in dilute solution — Part 1: General conditions

Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles

Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles

Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles — Amendment 1

Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles

Plastics — Directives for the standardization of methods for the determination of the dilute solution viscosity of polymers

Plastics — Liquid resins — Determination of density by the pyknometer method

Plastics — Liquid resins — Determination of density by the pyknometer method

Plastics — Liquid resins — Determination of density by the pycnometer method

Plastics — Determination of hardness — Part 1: Ball indentation method

Plastics — Determination of hardness — Part 1: Ball indentation method

Plastics — Determination of hardness — Part 1: Ball indentation method

Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness

Plastics — Determination of hardness — Part 2: Rockwell hardness

Plastics and ebonite — Determination of hardness by the ball indentation method

Plastics — Polymer dispersions — Determination of white point temperature and minimum film-forming temperature

Resins in the liquid state or as emulsions or dispersions — Determination of Brookfield RV viscosity

Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity by the Brookfield Test method

Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity using a single cylinder type rotational viscometer method

Plastics — Determination of time-temperature limits after exposure to prolonged action of heat

Plastics — Determination of time-temperature limits after prolonged exposure to heat

Plastics — Preparation of test specimens by machining

Plastics — Preparation of test specimens by machining — Technical Corrigendum 1

Plastics — Preparation of test specimens by machining

Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method

Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers

Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods

Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods — Technical Corrigendum 1

Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods

Plastics — Preparation and use of multipurpose test specimens

Plastics — Multipurpose test specimens

Plastics — Multipurpose test specimens

Plastics — Multipurpose test specimens

Rheology — Part 1: Vocabulary and symbols for rotational and oscillatory rheometry

Rheology — Part 2: General principles of rotational and oscillatory rheometry

Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate

Paints, varnishes and plastics — Determination of non-volatile-matter content

Paints, varnishes and plastics — Determination of non-volatile-matter content

Paints, varnishes and plastics — Determination of non-volatile-matter content

Plastics — Determination of ash — Part 1: General methods

Plastics — Determination of ash — Part 1: General methods

Plastics — Determination of ash — Part 1: General methods

Plastics — Determination of ash — Part 1: General methods

Withdrawal of ISO 3451-1976

Withdrawal of ISR/TR 3717-1975

Withdrawal of ISO/TR 3718-1975

Plastics — Measurement of resistivity of conductive plastics

Plastics — Measurement of resistivity of conductive plastics

Plastics — Determination of modulus of elasticity by alternating flexure

Plastics — Polymer dispersions — Determination of sieve residue (gross particle and coagulum content)

Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light

Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources

Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources

Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources

Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources

Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance

Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test — Amendment 1

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 4: High gas velocity test

Plastics — Determination of flammability by oxygen index

Plastics — Determination of resistance to environmental stress cracking (ESC) — Bent strip method

Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method

Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method

Plastics — Methods of exposure to natural weathering

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Plastics — Environmental aspects — Analysis of relevant terms used in the sector and need for standardization

Chemically-induced ultra-weak photon emission (UPE) — Measurement as an analysis method of degradation of polymeric material

Measurement method of anti-biofilm activity on plastic and other non-porous surfaces

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc sources

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1: Classification of daylight filters

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps — Technical Corrigendum 1

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

Plastics — Ion exchange resin — Part 1: Determination of exchange capacity of acrylic anion exchange resins

Plastics — Ion exchange resin — Part 2: Determination of water content of anion exchange resins in hydroxide form by centrifugation

Plastics — Ion exchange resin — Part 3: Determination of exchange capacity of anion exchange resins in hydroxide form

Plastics — Determination of specific aerobic biodegradation rate of solid plastic materials and disappearance time (DT50) under mesophilic laboratory test conditions

Specifications for use of poly(lactic acid) based filament in additive manufacturing applications

Plastics — Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment — Test methods and requirements

Plastics — Smoke generation — Part 1: Guidance on optical-density testing

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test — Technical Corrigendum 1

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method

Testing and characterization of mechanically recycled polypropylene (PP) and polyethylene (PE) for intended use in different plastics processing techniques

Plastics — Test method of exposure to white LED lamps

Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Plastics — Determination of pourability

Plastics — Determination of environmental stress cracking (ESC) — Constant tensile stress method

Plastics — Determination of environmental stress cracking (ESC) — Constant-tensile-stress method

Plastics — Determination of matter extractable by organic solvents (conventional methods)

Plastics — Determination of matter extractable by organic solvents (conventional methods)

Plastics — Determination of matter extractable by organic solvents (conventional methods)

Plastics — Friction and wear by sliding — Identification of test parameters

Plastics — Friction and wear by sliding — Identification of test parameters

Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 1: Falling dart method

Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing

Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 2: Instrumented puncture test

Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing

Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing

Plastics — Determination of dynamic mechanical properties — Part 1: General principles

Plastics — Determination of dynamic mechanical properties — Part 1: General principles — Technical Corrigendum 1

Plastics — Determination of dynamic mechanical properties — Part 1: General principles

Plastics — Determination of dynamic mechanical properties — Part 1: General principles

Plastics — Determination of dynamic mechanical properties — Part 1: General principles

Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method

Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method — Technical Corrigendum 1

Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method

Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method

Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method

Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method — Technical Corrigendum 1

Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method

Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method — Amendment 1

Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method — Amendment 1

Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method — Amendment 1

Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method

Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method

Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method

Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method — Amendment 1: Precision

Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method

Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate and a cone-and-plate oscillatory rheometer

Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature

Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature

Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method

Plastics — Plastics identification using Raman spectrometric methods

Plastics — Thermogravimetry of polymers — Temperature scanning method

Plastics — Determination of tensile-impact strength

Plastics — Determination of tensile-impact strength — Technical Corrigendum 1

Plastics — Determination of tensile-impact strength

Plastics — Determination of tensile-impact strength

Plastics — Determination of permanganate absorption number of caprolactam — Spectrometric method

Plastics — Polymer dispersions — Determination of density

Plastics — Determination of resistance to wear by abrasive wheels

Plastics — Determination of resistance to wear by abrasive wheels

Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method

Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method

Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method

Plastics — Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source

Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source — Amendment 1: Specimens

Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources — Technical Corrigendum 1

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials

Plastics — Acquisition and presentation of comparable single-point data

Plastics — Determination of the combustibility of specimens using a 125 mm flame source

Plastics — Survey of ignition sources used for national and international fire tests

Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy

Plastics — Guidance for the use of standard fire tests

Plastics — Burning behaviour — Guidance for development and use of fire tests

Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1

Plastics — Guidance for the use of standard fire tests

Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)

Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)

Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles

Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles

Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles

Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles

Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature

Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height

Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height

Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization

Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization — Amendment 1

Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization

Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization

Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity

Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity

Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity

Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time

Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time — Amendment 1

Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics

Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics

Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics

Plastics — Differential scanning calorimetry (DSC) — Part 8: Determination of thermal conductivity

Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles

Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles

Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy

Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy

Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy

Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics

Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics

Plastics — Thermogravimetry (TG) of polymers — General principles

Plastics — Thermomechanical analysis (TMA) — Part 1: General principles

Plastics — Thermomechanical analysis (TMA) — Part 1: General principles

Plastics — Thermomechanical analysis (TMA) — Part 1: General principles

Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature

Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature

Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties

Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers

Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers

Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers

Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers

Plastics — Generic identification and marking of plastic products

Plastics — Generic identification and marking of plastics products

Plastics — Generic identification and marking of plastics products

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: Guidance

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 3: Dynamic decomposition method using a travelling furnace

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods

Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method

Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method

Plastics — Vertical flame spread determination for film and sheet

Plastics — Vertical flame spread determination for film and sheet

Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument

Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument

Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument

Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument

Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach

Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach — Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres

Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 1: Direct liquid injection method

Plastics/rubber — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 1: Direct liquid injection method

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 2: Headspace method

Plastics — Simple heat release test using a conical radiant heater and a thermopile detector

Plastics — Simple heat release test using a conical radiant heater and a thermopile detector

Plastics — Simple heat release test using a conical radiant heater and a thermopile detector

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production

Plastics — Determination of haze for transparent materials

Plastics — Determination of haze for transparent materials — Technical Corrigendum 1

Plastics — Determination of haze for transparent materials

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer — Technical Corrigendum 1

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide — Technical Corrigendum 1

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production — Technical Corrigendum 1

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method — Technical Corrigendum 1

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test — Technical Corrigendum 1

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test

Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide

Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Amendment 1: Use of activated vermiculite instead of mature compost

Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC

Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC

Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC

Plastics — Guidelines for the recovery and recycling of plastics waste

Plastics — Guidelines for the recovery and recycling of plastics waste

Plastics — Methods for marine exposure

Plastics — Methods for marine exposure

Plastics — Determination of water content

Plastics — Determination of water content

Plastics — Determination of water content

Plastics — Determination of water content

Plastics — Determination of water content

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products

Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach

Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach

Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas

Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas — Technical Corrigendum 1

Plastics — Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions — Method by analysis of released biogas

Plastics — Determination of linear dimensions of test specimens

Plastics — Determination of linear dimensions of test specimens — Technical Corrigendum 1

Plastics — Determination of linear dimensions of test specimens

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles — Technical Corrigendum 1

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles

Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method

Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method

Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method

Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 5: Method using light-scattering detection

Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method

Plastics — Determination of xylene-soluble matter in polypropylene

Plastics — Determination of xylene-soluble matter in polypropylene

Plastics — Biobased content — Part 1: General principles

Plastics — Biobased content — Part 2: Determination of biobased carbon content

Plastics — Biobased content — Part 2: Determination of biobased carbon content

Plastics — Biobased content — Part 3: Determination of biobased synthetic polymer content

Plastics — Biobased content — Part 4: Determination of biobased mass content

Plastics — Biobased content — Part 4: Determination of biobased mass content

Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content

Plastics — Optimized intertidal seawater and sediment preparation for marine biodegradation testing of plastics

Plastics — Disintegration field test of plastics under water environmental conditions

Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations

Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations

Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test

Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test

Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test

Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test

Specifications for compostable plastics

Specifications for compostable plastics

Plastics — Organic recycling — Specifications for compostable plastics

Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image)

Plastics — Determination of yellowness index and change in yellowness index

Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)

Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)

Plastics — Guide to the acquisition and presentation of design data

Plastics — Environmental aspects — General guidelines for their inclusion in standards

Plastics — Environmental aspects — General guidelines for their inclusion in standards

Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility

Plastics — Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved

Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved

Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved

Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method

Plastics — Determination of specific volume as a function of temperature and pressure, pvT diagram — Piston apparatus method

Plastics — Standard table for reference global solar spectral irradiance at sea level — Horizontal, relative air mass 1

Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface — Method by measuring the oxygen demand in closed respirometer

Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance

Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions

Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions

Plastics — Determination of scratch properties

Plastics — Determination of scratch properties

Plastics — Instrumented micro-indentation test for hardness measurement

Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide

Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide

Plastics — Abrasion test method for artificial turfs using combined UV exposure and mechanical wear

Plastics — Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS

Plastics — Temperature modulated DSC — Part 1: General principles

Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp

Plastics — Temperature modulated DSC — Part 3: Separation of overlapping thermal transitions

Plastics — Guidance on fire characteristics and fire performance of PVC materials used in building applications

Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test

Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test

Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test

Plastics — Determination of abrasive wear by reciprocating linear sliding motion

Plastics — Test specimens

Plastics — Test specimens

Plastics — Test specimens

Plastics — Determination of the transient extensional viscosity of polymer melts

Plastics — Determination of the transient extensional viscosity of polymer melts

Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens

Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation

Plastics — Test method for exposing polyolefins outdoors combining natural weathering and artificial irradiation

Plastics and ebonite — Verification of Shore durometers

Measurement of antiviral activity on plastics and other non-porous surfaces

Plastics — Environmental aspects — State of knowledge and methodologies

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Light flash method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 7: Transient measurement of thermal effusivity using a plane heat source

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 1: General guidance

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 2: Constant tensile load method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 3: Bent strip method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 4: Ball or pin impression method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 5: Constant tensile deformation method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 6: Slow strain rate method

Plastics — Validation of force-time curves obtained from high-speed tensile tests

Plastics — Measurement of antibacterial activity on plastics surfaces

Measurement of antibacterial activity on plastics and other non-porous surfaces

Plastics — Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions — Test methods and requirements

Plastics — Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment — Method by analysis of evolved carbon dioxide

Plastics — Carbon and environmental footprint of biobased plastics — Part 1: General principles

Plastics — Carbon and environmental footprint of biobased plastics — Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule

Plastics — Carbon and environmental footprint of biobased plastics — Part 3: Process carbon footprint, requirements and guidelines for quantification

Plastics — Carbon and environmental footprint of biobased plastics — Part 4: Environmental (total) footprint (Life cycle assessment)

Plastics — Determination of the degree of disintegration of plastic materials in marine habitats under real field conditions

Plastics — Determination of fracture toughness of films and thin sheets — Essential work of fracture (EWF) method

Plastics — Elasticity index — Determination of elastic property of melts

Plastics — Determination of apparent activation energies of property changes in standard weathering test methods

Plastics — Determination of spray water delivery during spray cycles when using a xenon arc weathering test apparatus

Plastics — Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions

Plastics — Recycling and recovery — Necessity of standards

Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics

Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter

Plastics — Application of spread of flame test to plastic pipes

Plastics — Fast differential scanning calorimetry (FSC) — Chip calorimetry

Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 1: Method by analysis of evolved carbon dioxide

Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 2: Method by measuring the oxygen demand in closed respirometer

Principles for the analysis of microplastics present in the environment

Plastics — Production quality control — Statistical method for using single measurements

Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites

Plastics — Determination of total luminous transmittance and reflectance

Plastics — Determination of J-R curves — Fracture toughness

Plastics — Determination of mode I plane-strain crack-arrest toughness

Plastics — Artificial weathering including acidic deposition

Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites

Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods

Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods

Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods — Amendment 1

Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods — Amendment 1

Determination of certain substances in electrotechnical products — Part 11: Tris (2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS)