Filter :
Standard and/or project | Stage | TC |
---|---|---|
Technical product documentation (TPD) — General principles of presentation — Part 15: Presentation of shipbuilding drawings
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — General principles of presentation — Part 24: Lines on mechanical engineering drawings
|
95.99 | ISO/TC 10/SC 6 |
Technical drawings — General principles of presentation — Part 24: Lines on mechanical engineering drawings
|
95.99 | ISO/TC 10/SC 6 |
Technical drawings — General principles of presentation — Part 25: Lines on shipbuilding drawings
|
95.99 | ISO/TC 10/SC 6 |
Technical drawings — General principles of presentation — Part 34: Views on mechanical engineering drawings
|
95.99 | ISO/TC 10/SC 6 |
Technical drawings — General principles of presentation — Part 44: Sections on mechanical engineering drawings
|
95.99 | ISO/TC 10/SC 6 |
Technical product documentation (TPD) — General principles of presentation — Part 71: Simplified representation for mechanical engineering drawings
|
90.60 | ISO/TC 10/SC 6 |
Withdrawal of ISO/R 1101/1-1969
|
95.99 | ISO/TC 10 |
Technical drawings — Tolerances of form and of position — Part 2: Maximum material principle
|
95.99 | ISO/TC 10 |
Technical drawings — Geometrical tolerancing — Tolerancing of form, orientation, location and run-out — Generalities, definitions, symbols, indications on drawings
|
95.99 | ISO/TC 213 |
Technical drawings — Geometrical tolerancing — Tolerancing of form, orientation, location and run-out — Generalities, definitions, symbols, indications on drawings — Extract 1: Toleranced characteristics and symbols — Examples of indication and interpretation
|
95.99 | ISO/TC 10 |
Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out — Technical Corrigendum 1
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
|
90.93 | ISO/TC 213 |
Technical drawings — Method of indicating surface texture on drawings
|
95.99 | ISO/TC 10 |
Technical drawings — Method of indicating surface texture
|
95.99 | ISO/TC 10/SC 6 |
Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation
|
95.99 | ISO/TC 213 |
Technical drawings — Dimensioning and tolerancing of profiles
|
95.99 | ISO/TC 10 |
Technical drawings — Dimensioning and tolerancing of profiles
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing
|
90.93 | ISO/TC 213 |
Technical product documentation — Springs — Part 1: Simplified representation
|
90.93 | ISO/TC 10/SC 6 |
Technical product documentation — Springs — Part 2: Presentation of data for cylindrical helical compression springs
|
90.93 | ISO/TC 227 |
Technical product documentation — Springs — Part 3: Vocabulary
|
95.99 | ISO/TC 227 |
Technical drawings — Representation of springs
|
95.99 | ISO/TC 10 |
Technical drawings — Conventional representation of gears
|
90.93 | ISO/TC 10/SC 6 |
Welds — Symbolic representation on drawings
|
95.99 | ISO/TC 44 |
Welds — Symbolic representation on drawings
|
95.99 | ISO/TC 44/SC 7 |
Welded, brazed and soldered joints — Symbolic representation on drawings
|
95.99 | ISO/TC 44/SC 7 |
Welding and allied processes — Symbolic representation on drawings — Welded joints
|
95.99 | ISO/TC 44/SC 7 |
Welding and allied processes — Symbolic representation on drawings — Welded joints
|
90.60 | ISO/TC 44/SC 7 |
Technical drawings — Geometrical tolerancing — Maximum material principle
|
95.99 | ISO/TC 213 |
Technical drawings — Geometrical tolerancing — Maximum material principle — Amendment 1: Least material requirement
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
|
60.60 | ISO/TC 213 |
Technical drawings — Dimensioning and tolerancing cones
|
95.99 | ISO/TC 10 |
Technical drawings — Dimensioning and tolerancing — Cones
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones
|
90.93 | ISO/TC 213 |
Technical drawings — Simplified representation of bars and profile sections
|
90.93 | ISO/TC 10/SC 1 |
Technical drawings — Geometrical tolerancing — Positional tolerancing
|
95.99 | ISO/TC 10 |
Technical drawings — Geometrical tolerancing — Datums and datum-systems for geometrical tolerances
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
|
60.60 | ISO/TC 213 |
Technical drawings — Geometrical tolerancing — Tolerancing of form, orientation, location and run-out — Verification principles and methods — Guidelines
|
95.99 | ISO/TC 213 |
Technical drawings — Simplified representation of the assembly of parts with fasteners — Part 1: General principles
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Simplified representation of the assembly of parts with fasteners — Part 2: Rivets for aerospace equipment
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Screw threads and threaded parts — Part 1: General conventions
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Screw threads and threaded parts — Part 2: Screw thread inserts
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Screw threads and threaded parts — Part 3: Simplified representation
|
95.99 | ISO/TC 10/SC 6 |
Technical drawings — Screw threads and threaded parts — Part 3: Simplified representation
|
60.60 | ISO/TC 10/SC 6 |
Technical drawings — Conventional representation of threaded parts
|
95.99 | ISO/TC 10 |
Technical drawings — Simplified representation of centre holes
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Representation of splines and serrations
|
95.99 | ISO/TC 10/SC 6 |
Technical product documentation — Representation of splines and serrations
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Symbols for geometrical tolerancing — Proportions and dimensions
|
95.99 | ISO/TC 10/SC 1 |
Technical product documentation — Symbols used in technical product documentation — Proportions and dimensions
|
60.60 | ISO/TC 10/SC 1 |
Technical drawings — Fundamental tolerancing principle
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules
|
90.93 | ISO/TC 213 |
Technical drawings — Rolling bearings — Part 1: General simplified representation
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Rolling bearings — Part 2: Detailed simplified representation
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Seals for dynamic application — Part 1: General simplified representation
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Seals for dynamic application — Part 2: Detailed simplified representation
|
90.93 | ISO/TC 10/SC 6 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 1: General
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General
|
90.60 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 2: Material imperfections — Stress birefringence
|
95.99 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 3: Material imperfections — Bubbles and inclusions
|
95.99 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 4: Material imperfections — Inhomogeneity and striae
|
95.99 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
|
95.99 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances — Technical Corrigendum 1
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
|
90.92 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring and tilt tolerances
|
40.60 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances
|
95.99 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances — Technical Corrigendum 1
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances
|
90.92 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections
|
90.93 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 8: Surface texture
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture; roughness and waviness
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture
|
90.60 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating
|
90.93 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 10: Table representing data of a lens element
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 10: Table representing data of optical elements and cemented assemblies
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data — Technical Corrigendum 1
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data
|
90.92 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data
|
40.60 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces — Amendment 1
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
|
90.60 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 13: Laser irradiation damage threshold
|
95.99 | ISO/TC 172/SC 1 |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance
|
95.99 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance
|
90.93 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 16: Diffractive surfaces
|
60.60 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 17: Laser irradiation damage threshold
|
90.93 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae
|
90.93 | ISO/TC 172/SC 1 |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: General description of surfaces and components
|
90.93 | ISO/TC 172/SC 1 |
Technical drawings — Simplified representation of moulded, cast and forged parts
|
95.99 | ISO/TC 10/SC 6 |
Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
|
90.93 | ISO/TC 213 |
Technical drawings — Tolerancing of orientation and location — Projected tolerance zone
|
95.99 | ISO/TC 213 |
Technical drawings — Dimensioning and tolerancing — Non-rigid parts
|
95.99 | ISO/TC 213 |
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts
|
90.93 | ISO/TC 213 |
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts — Technical Corrigendum 1
|
60.60 | ISO/TC 213 |
Technical product documentation (TPD) — Dimensioning and indication of knurling
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Corners — Vocabulary and indication on drawings
|
95.99 | ISO/TC 10/SC 6 |
Technical drawings — Edges of undefined shape — Vocabulary and indications
|
95.99 | ISO/TC 10/SC 6 |
Technical product documentation — Edges of undefined shape — Indication and dimensioning
|
90.60 | ISO/TC 10/SC 6 |
Geometrical Product Specifications (GPS) — Geometrical features — Part 1: General terms and definitions
|
95.99 | ISO/TC 213 |
Geometrical Product Specifications (GPS) — Geometrical features — Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
|
95.99 | ISO/TC 213 |
Technical drawings — Symbolic presentation and indication of adhesive, fold and pressed joints
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Simplified representation and dimensioning of holes
|
90.93 | ISO/TC 10/SC 6 |
Technical product documentation — Heat-treated ferrous parts — Presentation and indications
|
95.99 | ISO/TC 10/SC 6 |
Technical product documentation — Heat-treated ferrous parts — Presentation and indications
|
90.60 | ISO/TC 10/SC 6 |
Springs — Symbols
|
90.92 | ISO/TC 227 |
Technical product documentation (TPD) — General requirements of digital mock-up for mechanical products
|
90.60 | ISO/TC 10/SC 6 |
Technical product documentation (TPD) — Relief grooves — Types and dimensioning
|
90.93 | ISO/TC 10/SC 6 |
No matching records found. Please try changing the filter settings.